Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Removing pully from vn v8 p\s pump
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Removing pully from vn v8 p\s pump
Does any one know if it is possible to remove the pully from a vn v8 power steering pump? If so is the allen headed bolt left or right hand thread?
Reptile fabrication.
www.agroautomotive.net
www.agroautomotive.net
AFAIK the pulley is pressed on, the allen key hole is so you can hold or turn the shaft.
You need a power steering pump puller/fitter. If you don't use one, you will almost definately root the pulley, either removing it or refitting it.
You need a power steering pump puller/fitter. If you don't use one, you will almost definately root the pulley, either removing it or refitting it.
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Where would i get one of these are they Genuine holden parts.CRUSHU wrote:AFAIK the pulley is pressed on, the allen key hole is so you can hold or turn the shaft.
You need a power steering pump puller/fitter. If you don't use one, you will almost definately root the pulley, either removing it or refitting it.
Reptile fabrication.
www.agroautomotive.net
www.agroautomotive.net
most places like bursons, repco and bearing supply joints sell a kit for p/s pully it slides over and hooks on the rib the screws in pressing the pully of then the kit should have a installed which screws into the thread on the shaft and press's it back on there not to expensive and handy to to have as they do alts and water pump pulleys for a range of different vehicles
HZJ73, lifted,crawler gears, double locked, sitting on 35's
What they said, they're also not a holden pump, they're made by saginaw, and fords been using them forever aswell 
Well since XD falcons anyway
OOPS
: Typo
Well since XD falcons anyway
OOPS
: Typo
Last edited by cloughy on Sat Dec 30, 2006 8:28 am, edited 1 time in total.
Wanted: Car trailer or beaver tail truck, let me know what you got
cloughy wrote:What they said, they're also not a holden pump, they're made by sadinaw, and fords been using them forever aswell
Well since XD falcons anyway
Ahh, that would be Saginaw..... an OEM supplier.
www.CVEPerformance.com
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Who is online
Users browsing this forum: No registered users and 2 guests