Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi everyone, I'm new to this site but I am interested in gauging interest in this product. I released it and sold a large qty some years ago and have had a few people ask again for it but like everything to keep the price down I obviously need to order a reasonable qty. I hope to keep the price below the $30 mark.
If anyone finds this product interesting please let me know, if anyone would be interested in posssibly buying one also let me know. I have used it with a High Lift as well and its great but the main benefit is you can use your standard jack.... check these pics out anyway and lets know what you think. Happy to answer questions
it does look well made maybe from a similar tough plastic material used in wheelie bins and for $30 its rather cheap. i guess some people arent as handy as others or like to have all the latest gizmos.
personally my 30x30cm piece of 18mm ply does the job for me and cost me nothing. I think most people on this board would have a similar setup.
cheers.
IF IT MOVES, SHOOT IT
IF IT DOESNT, CUT IT DOWN
IF ITS GREEN, PISS ON IT
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
why not use an offcut of 2inx foot sq thick timber from timberyard? usually free
Its made of high density polyprop.
Yeh I did use timber and bits of other stuff (bbq plate) over the years I actually wanted something that was light, strong and could double as a filleting board on the reverse. Thanks for the input. Cheers
guzzla wrote:it does look well made maybe from a similar tough plastic material used in wheelie bins and for $30 its rather cheap. i guess some people arent as handy as others or like to have all the latest gizmos.
personally my 30x30cm piece of 18mm ply does the job for me and cost me nothing. I think most people on this board would have a similar setup.
cheers.
Yep, I agree and I have used all sorts of plates over the time myself. Its high density poly and doesn't have much flex at all even with 3+ ton sitting over it, so its good on the nasty stuff and doubles as a filleting board on the reverse. Tks for the feedback
Thanks everyone I did start replying to each one seperately but I figured I would respond here, its easier. I have tried all the options as well, timber, bbq plate, old plastic bread board but wanted something that bit tougher, lighter, and could double as a filleting board on the reverse, so thats why we went with the high density poly. As far as posting thats the easy bit. Thanks for the feedback , so far it seems to favour other cheap/free objects and that OK.
chimpboy wrote:To me it has a little bit of a "gift" feel, something that I probably wouldn't quite buy for myself but that someone might get me for a birthday.
I could also see it selling as part of a recovery kit rather than on its own.
I like your thinking I did approach the guys from T-Max about including in as part of a kit and they were at the time trying to have it produced off shore so it could be low cost, all keen but it went on and on and on and.....just got too hard for me so I bailed but the option is a good - Cheers
chimpboy wrote:To me it has a little bit of a "gift" feel, something that I probably wouldn't quite buy for myself but that someone might get me for a birthday.
I could also see it selling as part of a recovery kit rather than on its own.
I like your thinking I did approach the guys from T-Max about including in as part of a kit and they were at the time trying to have it produced off shore so it could be low cost, all keen but it went on and on and on and.....just got too hard for me so I bailed but the option is a good - Cheers
i can have this reproduced for you ALOT cheaper at the exact same if not better quality offshore
PM me and we can talk,.
Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
chimpboy wrote:To me it has a little bit of a "gift" feel, something that I probably wouldn't quite buy for myself but that someone might get me for a birthday.
I could also see it selling as part of a recovery kit rather than on its own.
I like your thinking I did approach the guys from T-Max about including in as part of a kit and they were at the time trying to have it produced off shore so it could be low cost, all keen but it went on and on and on and.....just got too hard for me so I bailed but the option is a good - Cheers
i can have this reproduced for you ALOT cheaper at the exact same if not better quality offshore
PM me and we can talk,.
Jes
Cheers and thanks. I suppose I need to await the verdict here firstly to see if theres any real need. cheers Brett
This little baby is going to be accompanying me on several navruns, the pajero challenge, a navnite, The engel series, the Out Back Challenge, the piranha pursuit, the cliff hanger and maybe the Alpine so i'd be thinking it may get used.
Might even take it away on a few weekenders aswell.
Oh and the amazing race..
You'll get a full report when i sight it and test it
Start waiting with bated breath......
Cheers Dan.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
chimpboy wrote:To me it has a little bit of a "gift" feel, something that I probably wouldn't quite buy for myself but that someone might get me for a birthday.
I could also see it selling as part of a recovery kit rather than on its own.
I like your thinking I did approach the guys from T-Max about including in as part of a kit and they were at the time trying to have it produced off shore so it could be low cost, all keen but it went on and on and on and.....just got too hard for me so I bailed but the option is a good - Cheers
i can have this reproduced for you ALOT cheaper at the exact same if not better quality offshore
PM me and we can talk,.
Jes
Cheers and thanks. I suppose I need to await the verdict here firstly to see if theres any real need. cheers Brett
Another possible market would be mobile crane industry and crane trucks as outrigger pads. We used to use similar products roughly 450x450x50 with a handle. Heaps easier, lighter and durable than hardwood timber pads.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Pinball wrote:I would suggest that it is likely to be more popular with the touring club scene rather than the high mod/competition crowd.
Whats the lifespan, UV stability oil resistance etc like.
If they last to long you'll saturate your market.
Spock
I agree if your hard core you would have the gear, but other than that its an easy product to hide under the seat or anywhere really. Its possible life span is .....pick a very big number!
I like the idea that it doubles as a chopping board - with a shorty, I don't have room to carry a lot.
I made mine from a few layers of ply screwed together, then varnished with some floor varnish in an attempt to make it a little more waterproof. In 5 years, I think I've used it once.
If I'd seen one of these at $20 it would have been a no-brainer. $30 would have made me think, but the double-duty aspect helps.
Organise cheap offshore manufacture, make a large batch, then wholesale cheap (in large quantities) to chains like ARB & TJM - make it cheap enough for them, and they can start adding them to whatever kits they like. Wholesale a few hundred, in a few transactions?
[/img]
There's one in the mail on it's way! 
