Page 1 of 1
MK Radiator
Posted: Thu Jan 04, 2007 2:30 pm
by go piggen
I own a 85 mk lwb ute with a p40 engine and am looking to upgrade the radiator, I am in the near future going to put in a 350 chev in but not for a while , I will be upgrading averything else first does anyone now were to get new radiators for an mk in sydney or some brands that will fit, that will be able to cope with a bigger engine later on
Posted: Thu Jan 04, 2007 8:02 pm
by mk swb
mate a standard mk radiator is pleanty good enough for a 350 chev as long as u put el falcon twin thermos on. Thats what i have on my mk with a chev and it runs at 75degres all the time even on the beach. Make sure your radiator gets flushed before fitting the v8.
Cheers Rees
Posted: Fri Jan 05, 2007 5:07 pm
by go piggen
do the el thermos fit right on how easy are they to fit been told the au also fit but dont no witch fit better.
Posted: Fri Jan 05, 2007 9:27 pm
by mk swb
Mate not sure bout the au fans but el ones pretty much go straight on just a tiny bit of trimming and make some brakets to hold them on!! I just used some hoopine strap and a couple of tek screws!! I'll get some pics for you tomorrow. Really it only took me 30 mins to fit.
Cheers Rees
Posted: Fri Jan 05, 2007 9:34 pm
by neRok
you dont leave the thermos running all the time do you? i've got au thermos fitted to my commodore and they are wired to a thermo switch which turns them on only when the car gets a bit hot (ie. sitting at the lights) and usually turns it off about 30 seconds later when it gets cool enough.
i got my thermo fans from here
http://www.tuffcarparts.com/store/view_ ... %20FPLZW17
they were the cheapest i found.
Posted: Fri Jan 05, 2007 10:24 pm
by go piggen
Thanks for the info mate some pics would be good and i will look into that switch as well
Posted: Fri Jan 05, 2007 11:00 pm
by neRok
yer its a davies craig thermo switch. they sell them on that site for 55 but i got it for 47 at the local auto one. you stick a probe into the top hose and it turns the fan on (well activates a really that the fans run through) when it gets to a temp, which you adjust with a little dial. a little bit of wiring but pretty easy. it can also be made to turn the fans on when you turn the ac on.
and some computers (if you were going efi) can run the fans (just like the thermo switch) themselves. the holden v8 5l can but it needs a re-tune as its disabled from the factory as they run a regular fan off the pulley.
EDIT: with the termo switch, you will probably find after putting the probe in it will leak out the top hose. they do give you a little rubber thing but it doesnt work. so just get some gasket sealant stuff that is sensor safe, put some of that on the radiator outlet and wack the hose on. wont leak after that.