Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 Speed Reverse Switch

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 45
Joined: Wed Oct 04, 2006 2:08 pm
Location: WA

4 Speed Reverse Switch

Post by neRok »

My SWB MQ does not put its reverse lights on. the wiring is ok (because if i unplug the wires from the switch and put them together then the the lights go on). its is 100% without a doubt the switch that is stuffed.

anyone know what could be wrong with it? is it possible to replace it with the gearbox still in the car (i dont want to pull it apart). i tried twisting the black plastic (thinking it was a unit) but that just ripped off exposing a sort of foam and some more wire. there is a large (~22mm) bolt as well. if i take this off, is that the switch and i can just put a new one on? will oil piss out of the gearbox?

cheers.
Top
Posts: 148
Joined: Fri Dec 29, 2006 9:22 pm
Location: Melbourne

Post by juls »

Oil shouldnt come out. Pretty sure it is above the filler.

My reverse lights didnt work however it was a dodgy connection in the plugs (someone had added spade terminals and these had come loose)

You should be able to test the switch with a multimeter b4 you pull it out too.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests