Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LSD in front of a patrol

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 20
Joined: Sun Jun 25, 2006 7:59 pm
Location: brindabella

LSD in front of a patrol

Post by wharf »

Is there any way you can fit a LSD in the front of a GQ patrol??Will the rear fit into the front?
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

a d22 narvara rear lsd carrier fits in your gq front housing using your gq crown wheel
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Posts: 20
Joined: Sun Jun 25, 2006 7:59 pm
Location: brindabella

Post by wharf »

Thanks mate,have you done this conversion?
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

I've got an LSD from a Terrano II (the one with the H233B 31 spline diff). You could also use one ot of a Patrol MQ.
I "shimmed" the LSD and steering is a little awkward while on 4WD but will bear until I can drop an ARB front...try to change your hubs to manual or eliminate the auto from the OEMs

Rear OEM LSD wont fit in the front. Front is 31 splines and rear 33...

good luck
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

arent the mqs the big huge diff?
try searching this topic has come up a lot before
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

GRINCH wrote:arent the mqs the big huge diff?
try searching this topic has come up a lot before
I understand MQs are the leaf spring models. The model previous to GQs...please tell me if I'm right
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Banned
Posts: 2150
Joined: Wed Jan 03, 2007 6:09 pm
Location: Melbourne, Australia

yep

Post by lolergram »

Mario wrote:
I understand MQs are the leaf spring models. The model previous to GQs...please tell me if I'm right

Think so! ;)
Don't expect to see my recipe, until I receive my cheque and collection fee
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Just look at ARB's locker fitment guide on their USA website.

You'll find that H233B diffs go back as far as 1988 on various Nissan models. 31 spline and axle size 1.2something inch.

cheers
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

straight bolt up job with a pathfinder rear diff,

i love mine
Jeep Wrangler TJ

Jeep Cherokee XJ
Posts: 212
Joined: Tue Sep 07, 2004 9:28 am
Location: Panama, Central America

Post by Mario »

Never engage your 4WD on solid ground if you´ve got LSD front and OEM hubs. On soft ground it´s very nice...

Anyways, my manual AVM hubs are on their way...
GQ TD42, OME 5" suspension, 3" bodylift, shimmed V6 Pathfinder LSD front, ARB rear, Safari snorkel, custom front and rear bumpers, Nissan 4.625 R&P, 37" MTRs.
Panama, Central America
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

What year pathfinder??

How much can you get these for from a wrecker?

Are they anywhere near as good as the gq rear lsd?


Jimmy
GQII Patrol YAY!!
Posts: 12
Joined: Thu Nov 23, 2006 5:08 pm
Location: Sydney Northern Beaches

Post by BushPig »

Yeh Yankee Dave,

My mech tells me the pathy diff needs machining to the point that the overall cost is same as an air locker. Did yours need machining, I notice you didnt reply to the last response!!! :?: :?: :?:
1990 4.2TD Troll.
2004 Discovery Classic
Traveller and Bushie
Posts: 671
Joined: Mon Aug 23, 2004 10:06 am
Location: Mornington

Post by YankeeDave »

i think it was a 97 or 98 pathy,

cost me $300 for the centre

no machining at all.
I took out the 3rd member,
Removed the centre
unbolted the crown gear.
Bolted crown gear on lsd centre
Bolted whole thing in 3rd member
Checked back lash
Put back in car
Am now enjoying the benifit
Jeep Wrangler TJ

Jeep Cherokee XJ
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

Unless you can do it much cheaper I would go for an autolocker over an LSD in the front.

http://www.outerlimits4x4.com/viewtopic.php?t=97636

After all, its only engaged when you are in 4WD, and I would think would work much better than an LSD when you really need max traction (rocks particularly)

...but, a front LSD might be better at higher speeds on dirt (touring), dont have experience of this.
Post Reply

Who is online

Users browsing this forum: No registered users and 62 guests