I was wondering how much lift the rear of a Gen2 can take before the control arms are at their maximum? Mine currently has a 2" suspension lift and i was wondering whether i can get away with ~30mm coil spacers as well.
Is anyone running this setup and will i need to extend things like brake lines/hand break cable etc? Maybe a longer Panhard Rod too?
Just wondering wether it's worth it or not, mine seems (Well to me anyway) to bottom out too easily and the springs aren't that old either.
-Steele
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How much lift..
Moderator: -Scott-
How much lift..
Four wheels (Driving) good, two wheels bad.
NP Pajero with added goodness..
NP Pajero with added goodness..
I'd only put longer springs in if you wanted to drive around downhill all the time.....
.......As you won't be able to adjust the front to match........
Much cheaper solution - Why not just get heavier springs if it is bottoming out?
NJ
.......As you won't be able to adjust the front to match........
Much cheaper solution - Why not just get heavier springs if it is bottoming out?
NJ
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
I run 2" springs with 1" spacer as well, on my Gen 2 and have no dramas at all. Comfortable ride and you can hardly notice that the front is slightly higher than the rear.... she pretty much looks level with the front bump stops chopped and torsion bars cranked. I guess it is a 2.5" lift on front and 3" lift on rear. Looks and handles sweet i reckon!
Who is online
Users browsing this forum: No registered users and 0 guests