hey guys,
just wondering if it is good or bad or doesnt matter if u hose a carby out with the normal garden hose???
and NO not while its on the car
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Can u hose a carbie out???
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Can u hose a carbie out???
93 GQ LWB
4.2 Petrol
2" Spring
2" Body
Custom Front Tube Bar
2 1/2" Exhaust
Pioneer MP3
4.2 Petrol
2" Spring
2" Body
Custom Front Tube Bar
2 1/2" Exhaust
Pioneer MP3
no
use petrol kero diesel carby cleaner etc but id never use water
to much risk of a droplet getting stuck somewhere and causing surface rust or clogging the needle n seat etc
thinners can also be a bit of a no no for drying out the seals altho it does work well
use petrol kero diesel carby cleaner etc but id never use water
to much risk of a droplet getting stuck somewhere and causing surface rust or clogging the needle n seat etc
thinners can also be a bit of a no no for drying out the seals altho it does work well
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold
i think i have a problem
i have hosed out carbies before only when fully striped apart was good to dislodge stubborn crap in the idle jet you could see the stuffed spray pattern then upped the pressure blew it out then good spray pattern
i just hosed out all passages under pressurethen hit it with compressed air sit in sun to dry out and reassemble
well it worked for me
i just hosed out all passages under pressurethen hit it with compressed air sit in sun to dry out and reassemble
well it worked for me
carby
i use carby cleaner to clean and a rag to wipe it also an air blower that way you won't damage or swell any of the seals or leave any water in the carby as spoke about above . when you pull it apart pull all the jets out and blow through them with a air blower as well as the holes and tubes in it then you know that they are all clear .
Who is online
Users browsing this forum: No registered users and 10 guests