Outer Limits 4x4 Board

G'day,

I was just wondering if anyone knows of anywhere that does hub seal replacement kit?

I haver a severe leak on the drivers side locking hub.

cheers,
Sean

Theres only 2 gaskets isn't there?

I did my wheel bearings and replaced the gaskets inbetween the hub and the axle housing and the gasket between the hub and the twisty thing!

For the four gaskets was $9 I got them from toyota but suzuki should have them! All aisin hubs use the same gaskets!

seals r different to gaskets, i assume ur after the inner axle seal and the wiper and felt seals for the swivel hub?, if so spend the xtra get genuine zook stuff as the aftermarket stuff is crap, also it might pay to change ur swiveel hub bearings while its all apart.

suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.

Sean wrote:G'day,

I was just wondering if anyone knows of anywhere that does hub seal replacement kit?

I haver a severe leak on the drivers side locking hub.

cheers,
Sean

where are you at? im in syd i just done my front axle seals n bearings i got the bearings and seals from cbc bearings-$28bearings,-$10inner axle seals.
and the wiper and felt seal from suzisport spares seven hills-$50 for 2 rubber knuckel seal and 2 felt seals sides. im not to sure how cheap that was but there was no wait for them
web sites - http://www.yellowpages.com.au/onlineSol ... 6910&st=cs

http://www.conbear.com/

josh9465 wrote:suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.

I got my bearings and axle seals for $33 a side!

The guy over the road to wreck toyotas and remembered them yousing parts off patrol's suzuki's any thing with the aisin hubs and all compnants are the same exept for the axle spline aparantly!

So yes the two gaskets i got were off a 75 series ute but are apparently the same as the 45 ect. Just take your one down there and check but should be the same!

suzuki boy wrote:

josh9465 wrote:suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.

I got my bearings and axle seals for $33 a side!

The guy over the road to wreck toyotas and remembered them yousing parts off patrol's suzuki's any thing with the aisin hubs and all compnants are the same exept for the axle spline aparantly!

So yes the two gaskets i got were off a 75 series ute but are apparently the same as the 45 ect. Just take your one down there and check but should be the same!

cbc bearings-$28bearings,-$10inner axle seals.this is for both sides $38 all up and $50 for both sides wiper and felt seals

ive just done the king pin bearings and cups, knuckle oil seal and felt pads...the steering is like knew. much smoother and the steering doesnt shimmy.

albey wrote:

suzuki boy wrote:

josh9465 wrote:suzuki boy

so is the free wheeling hub gaskets for a sierra the same for like a toyota landcruiser free wheeling hub.

I got my bearings and axle seals for $33 a side!

The guy over the road to wreck toyotas and remembered them yousing parts off patrol's suzuki's any thing with the aisin hubs and all compnants are the same exept for the axle spline aparantly!

So yes the two gaskets i got were off a 75 series ute but are apparently the same as the 45 ect. Just take your one down there and check but should be the same!

cbc bearings-$28bearings,-$10inner axle seals.this is for both sides $38 all up and $50 for both sides wiper and felt seals

Mine was $33 a side with the seals and every thing so $66 all up! Did i get ripped? It's all fixed now!

thanks form the reply's guys,

i'm actually only after a seal for the locking hub. doing the whole hub assembly is a little to advanced for me right now.

cheers,
Sean