Will 3inch pipe do the job for a turbo td42? or should i go 4inch?.
What is the best air box to use, should i put a donaldson in there or adapt my snorkel straight to my turbo dyn air box?.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Stainless snorkel for td42
3 in should be fine, i have 3.5 on my supercharged shorty and it works well. We went shooping for A donaldson filter for my mates 3.5 carby rangie the other day and the salesman said a donaldson needs to be massive to provide enough air for the motor. To work out the cfm of the motor multiply engine hp X 2.5 and then go shopping for one, apparently he sold one to a guy with a gq and to get the right one for the job he had to mount it in the cab because it didn't fit under the bonnet
Rob
Rob
Re: Stainless snorkel for td42
I run a large Donaldson system, my Shorty should be at Action 4WD in Warragul next week so you could talk to Dave there asnd have a look.mattlux wrote:Will 3inch pipe do the job for a turbo td42? or should i go 4inch?.
What is the best air box to use, should i put a donaldson in there or adapt my snorkel straight to my turbo dyn air box?.
Jason
TIGGR6 - Got the plates but not the car...
Who is online
Users browsing this forum: No registered users and 59 guests