Page 1 of 1
Stainless snorkel for td42
Posted: Wed Jan 17, 2007 7:08 pm
by mattlux
Will 3inch pipe do the job for a turbo td42? or should i go 4inch?.
What is the best air box to use, should i put a donaldson in there or adapt my snorkel straight to my turbo dyn air box?.
Posted: Wed Jan 17, 2007 7:21 pm
by TUFFRANGIE
3 in should be fine, i have 3.5 on my supercharged shorty and it works well. We went shooping for A donaldson filter for my mates 3.5 carby rangie the other day and the salesman said a donaldson needs to be massive to provide enough air for the motor. To work out the cfm of the motor multiply engine hp X 2.5 and then go shopping for one, apparently he sold one to a guy with a gq and to get the right one for the job he had to mount it in the cab because it didn't fit under the bonnet
Rob
Re: Stainless snorkel for td42
Posted: Thu Jan 18, 2007 8:56 am
by Ossie
mattlux wrote:Will 3inch pipe do the job for a turbo td42? or should i go 4inch?.
What is the best air box to use, should i put a donaldson in there or adapt my snorkel straight to my turbo dyn air box?.
I run a large Donaldson system, my Shorty should be at Action 4WD in Warragul next week so you could talk to Dave there asnd have a look.
Jason