Page 1 of 1
hilux transfer qs
Posted: Wed Jan 17, 2007 9:03 pm
by cooter
what is the high range ratio for a 95 diesel hilux transfer case and also what is involved in twin transfer case mod??????
Posted: Wed Jan 17, 2007 10:53 pm
by Sic Lux
I'd say it would be 1:1 same as 2H when you understand how the toyota cases shifter/selector work you'll see why i say that. heres some links on duals and read the poll below and it sould be plenty of info
http://www.marlincrawler.com/htm/transf ... p_dual.htm
http://www.allprooffroad.com/index.php? ... view&id=18
http://www.marks4wd.com/products/advanc ... ual_tc.htm
Posted: Wed Jan 17, 2007 11:47 pm
by Willy Hilux
Duals you will need the adaptor and a transfer out of a 4 speed lux. Strip the back half of the original transfer, bolt on the adaptor and bolt on the complete 4 speed transfer. A few other little things but they are in the instructions provided. You will need to move the crossmember back or it is better to get a custom one to pick up both transfers or you will tear engine mounts.(speaking from experence). And cut a hole in the tunnel about 6" back I think.
Posted: Thu Jan 18, 2007 10:48 pm
by cooter
reason iam asking is that we are doin up my mates lux it now runs gq diffs and coils with 35,s and a 1uz-fe goin in this week
hiss diffs are 4.1 but were hoopin that we could gain more reduction in 2h by adding a second transfer i know a lot of 4bs have a slight reduction on high range and by adding a second high range to the mix would gain a bit more reduction would like to stay with 4.1 so that we both have the same ratio so we can use each others spares