Page 1 of 1
AUTO LOCK UP
Posted: Sun Jan 21, 2007 5:40 am
by lexi
I want to fit a simple on /off switch to lock Converter on Td42 auto
A switch with built in light on the dash and obviously a relay.
Can anyone do me a diagrahm showing the connections and the type of relay. I`ve seen one with a brake light switch etc etc and I only want on /off on mine. Any help appreciatted.
Alex
Posted: Fri Feb 02, 2007 6:41 am
by lexi
Guys ..........any idea where the solonoid for the lock up is to get a wire on it.
Alex
Posted: Sun Feb 04, 2007 7:04 pm
by Bad JuJu
Posted: Sun Feb 04, 2007 9:56 pm
by lexi
Thank you my friend. I have that link. I only want a switch and a relay so just wondered if it was a case of doing away with the extra relays and switches and just keeping the dash switch and main relay. It was just a diagram for that......... in case I am missing something by cutting out the extra stuff
Alex
Posted: Sun Feb 04, 2007 10:05 pm
by Bad JuJu
I geuss you could email the site owner.
You would have to be careful not to put a spike back into the gearbox ECU when the circuit is activated/deactivated seeing the fuse is 10A.
But Im no expert
Posted: Mon Feb 05, 2007 4:02 am
by lexi
Thanks Julu.
I thought that if Iused a relay with the diode protection in it that would stop the spike. I`ll see if one of the Shamen can help me . Thanks.
Alex