Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body lift in rodeo
Moderator: Moderators
body lift in rodeo
has anybody done a 2" body lift in a 94 duel cab rodeo??
I did the whole job myself with a bottle jack and a peice of wood.
To do the tray I put the jack on top of each rear wheel with a block of wood between the jack and the wheel arch. Just one lift each side for the tray. Put the blocks in one side then do the other.
To do the body I put bricks under the jack and used a peice of wood to again protect the floor of the cab. I had to jack the front first (under the driver's floor) and then the rear to get each side done. Putting the blocks in during each jack up.
Would help to have an extra guy to jack while you slotted the blocks in but not too bad to do it all yourself.
To do the tray I put the jack on top of each rear wheel with a block of wood between the jack and the wheel arch. Just one lift each side for the tray. Put the blocks in one side then do the other.
To do the body I put bricks under the jack and used a peice of wood to again protect the floor of the cab. I had to jack the front first (under the driver's floor) and then the rear to get each side done. Putting the blocks in during each jack up.
Would help to have an extra guy to jack while you slotted the blocks in but not too bad to do it all yourself.
Land Rover Discovery series 1 V8
Who is online
Users browsing this forum: No registered users and 2 guests