Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 Series - OME Steering Damper + Electrical Questions

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 89
Joined: Sun Dec 10, 2006 6:42 pm
Location: Sydney, NSW

60 Series - OME Steering Damper + Electrical Questions

Post by MYTANK »

Hey everyone.

Recently i bought an OME Steering Damper to replace my original.

Upon removing the original ( after alot of effort) i went to put the OME in.

Dad said that the OME steering damper would work better the other way around, so i installed it like this tightened it up and took it for a drive.

Pic: of how it looks now - Original Damper was the other way around (BIG END Up the top)

[img]http://img256.imageshack.us/my.php?image=img0295fn1.jpg
[/img]

I didn't even notice an improvement in steering feel ( although i'm not too sure what i was meant to feel)

Now... my electrical question.

After my recent new alternator

I went to turn the lights on, and my right indicator turned on and stayed on. Also... when indicating with no lights on the clock pulsates.

Appreciate everyones help.

Dan
________
0/________\0
|O|------|O|
[]----o----[]
Posts: 211
Joined: Sat Jun 19, 2004 1:32 pm
Location: Endeavour Hills - Vic

Post by cmcd »

Steering Damper - put it in so that if you get water/mud into the "top" end of it, it can drain out. I'm fairly sure steering would get difficult if you had a damper full of dry mud. ;)

Can't help with the electricals tho, sorry.. :oops:
Macca

[url=http://tinyurl.com/6ok59d]1990 GQ Patrol[/url] - 4" & 33's
[url=http://www.4bfabrications.com.au]4B Fabrications[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest