Hey
I am going to use the orig aircompessor off the vit motor for endless air use. going to ba a tank setup either in back of the zook or underneath (space pending). i am aiming to use an inline oiler as well posib
I was mainly enquiring of what the engine speed must be to get max airflow/pressure? i understand above idle?
i am not sure if these pumps pump more with more revs or once at a speed no more will come out.
Nic
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Suzuki a/c compressor tech
Suzuki a/c compressor tech
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Hey Nic,
I'm not sure of the max airflow of the unit, but because it is engine driven it will pump more with higher revs.
I have a couple of pic's from around the web of tanks that have been placed between the frame and body, and in the engine bay. I believe some people have also welded up the chassis rails and used that.
You should also consider running an airline (via t-piece) to an outlet at both front and rear bumpers or there abouts to allow easy connection for tyre inflation or running air tools. I believe I have some pic's of this as well (I have a vague memory that I might have saved them from a thread on here actually!).
Wouldnt mind helping out if you go ahead with this.
Kyle
I'm not sure of the max airflow of the unit, but because it is engine driven it will pump more with higher revs.
I have a couple of pic's from around the web of tanks that have been placed between the frame and body, and in the engine bay. I believe some people have also welded up the chassis rails and used that.
You should also consider running an airline (via t-piece) to an outlet at both front and rear bumpers or there abouts to allow easy connection for tyre inflation or running air tools. I believe I have some pic's of this as well (I have a vague memory that I might have saved them from a thread on here actually!).
Wouldnt mind helping out if you go ahead with this.
Kyle
.: http://www.suzukiinfo.com :.
Who is online
Users browsing this forum: No registered users and 32 guests