Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

75 Series PTO

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

75 Series PTO

Post by Z()LTAN »

on the 1HZ transferr case, i see what could be a PTO port, is this only a fluid drive pto port or can you install a piggyback direct drive pto, if so how would this work with gears and such
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Post by rockcrawler31 »

unbolt cover, put gasket goo on, bolt on pto outlet box, run driveshaft off box, recover POS stuck on side of hill with winch, go home and drink beer. That how it went with my 75 anyways.
http://www.populationparty.org.au/
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday Zolton...hows the lux or shouldnt i ask??
The pto is gear driven, u can run anything with it
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

dow50r wrote:Gday Zolton...hows the lux or shouldnt i ask??
The pto is gear driven, u can run anything with it
Do you know any RPM specs? In my case on the HJ75/thomas PTO.

I can't be stuffed counting :D
Tetanus rolling on 37's
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

lux gone, its HZJ75 time
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest