Can any one tell me are the 2 door and 4 door pans the same. im looking at a roll cage from my 2 door to put in a 4 door .Rear legs finish on wheel arch .
Regards Stu..
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
floor pans
Moderator: Micka
Most of the 2 doors had a vertical step in the middle of the floor just in front of the rear seat and wheel arches, four doors have a slope of about 45 deg.
The only 2 door which was supposed to have the 45 deg slope was the special CSK release, however a mate had a 72, 2 door with LHD with the sloped bit.
The only 2 door which was supposed to have the 45 deg slope was the special CSK release, however a mate had a 72, 2 door with LHD with the sloped bit.
Who is online
Users browsing this forum: No registered users and 1 guest