Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I'm interested in the extractors/exhaust + body lift + roof racks/spotties.
Care to throw some prices out there?
Oh, and if anyone wants the profile bar out of his display pic up there, fits Feroza II's and the like, pick it up from coffs harbour and it's yours for free! It never did fit my narrow track, mate :(
okay hotfourok, you can have the taillight for free...
AJ feroza..... i'll have a dig to see what it looks like for ECU coolant sensor, is it in engine bay?
Fearhoza... u can have the extractor/exhaust for say.... 300 buck, it's nearly new except for extractor... along with new exhaust gasket, roofrack with spotties... um... um..... not sure..... but what the hell.. u can have it for 30 bucks
body lift block costed me about 77bucks... its 70mm round solid aluminium block... can sell for 50bucks with the lot. bolt's metric, i just noticed while under the car... i'm missing 2 nuts for the long bolts...
Does anyone know if the exhaust systems are the same for Feroza's and Feroza II's? They should be, as the engines are the same. Just double checking before i think about buying
Exhausts should be the same on both NT and WT Ferozas/Feroza II.
ECU coolant sensor is at the rear of the motor, under the dizzy. There are 2 sensors there, I think. One for the temp guage and one for the ecu..... I think
i've looked to the rear but can't see anything, so i put my hand in to the rear of the motor, yep i could feel 2 wiring going into the rear of the motor, one felt bigger than the other, so... which side u after, the right or the left side of the car?
just a short note... i just forgetten to add i've got welded center to fit in front diff, brought it for 240 bucks but never gotten around to putting it in.. if someone want it, make a offer otherwise it'd make good paperweight
Well it's a want, not a need. If it is easier for you to have it picked up some time, along with most likely the exhaust and definitely the BL.. then hold it for me. If you want money sooner and rather get it done, sell it off. As long as the BL is mine