hi all
i have a tray back to suit my new 81 Hilux.
it is made out of steel rhs/box section tube
with a checkerplate floor
it is currently painted black
but the paint is all scuffed up and there is some moderate rust bubbling the paint off in some places.
the rust is crusty in some places but not affecting the structure yet
how is the best way to remove the existing paint (sand, sandblast, stripper, etc)
clean the rust back to clean metal (sand, converter, acid)
and refinish the thing? (powdercoat, paint acrylic/2pac)
want it to be affordable, i have access to 12cfm and acrylic gun.
if going 2pac i would need to get it sprayed etc. professionally
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
refinishing a tray
Moderators: toaddog, TWISTY, V8Patrol, Moderators
i went through this befor chrissy, probly the best way to do it was to pull the floor out of the tray and take the frame to a sand blaster have it cleaned up and either put a new floor in or just cleen ur old one up and weld it back into place, prime it up then paint it 2 pack . some sand blasters have painting faciliteis in there shops so u may be bale to to that.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
If you want it to look pretty good then get it blasted and powdercoated by a good powder coater.
Acrylic is obvously your cheapest option but it's rubbish. It's dull and even when buffed up doesn't hold gloss and is now where near as durable as 2 pack or powdercoat.
2 pack is good but wont fill sandbast pits, requires more prep and would probably work out dearer than powdercoat.
A good powdercoater will have the gear to blast it, prime it and paint it.
Cheers mick.
Acrylic is obvously your cheapest option but it's rubbish. It's dull and even when buffed up doesn't hold gloss and is now where near as durable as 2 pack or powdercoat.
2 pack is good but wont fill sandbast pits, requires more prep and would probably work out dearer than powdercoat.
A good powdercoater will have the gear to blast it, prime it and paint it.
Cheers mick.
Re: refinishing a tray
how much you reckon?SeptemberSquall wrote: want it to be affordable, i have access to blah blah blah
if going 2pac i would need to get it sprayed etc. professionally
Re: refinishing a tray
I don't know what sandblasters charge (maybe $100) but I reckon you could get it powdercoated for about $300 at a guess.SeptemberSquall wrote:how much you reckon?SeptemberSquall wrote: want it to be affordable, i have access to blah blah blah
if going 2pac i would need to get it sprayed etc. professionally
To paint in 2 pack i'd say you would be looking at about $500.
Prices vary heaps so I would ring a few places and get some prices.
Cheers Mick.
Who is online
Users browsing this forum: No registered users and 2 guests