I already have an opinion on this. I'd just like to know what people with more experience than I may think.
My question is....rear driveshaft, is a shaft with a uni at the rear end better than a shaft with a large rubber disc?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Opinions please.
Moderator: Micka
I think it depends.
If you're running a standard rear axle, then the rubber coupling is better to have, as it absorbs a lot of the impact when things get exciting and often gives first. If you're running HD axles and diffs, then it doesn't matter. It will absorb some vibration better than what a uni does.
This said, I run a uni-uni rear shaft because its stronger and more reliable.
If you're running a standard rear axle, then the rubber coupling is better to have, as it absorbs a lot of the impact when things get exciting and often gives first. If you're running HD axles and diffs, then it doesn't matter. It will absorb some vibration better than what a uni does.
This said, I run a uni-uni rear shaft because its stronger and more reliable.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
I surveyed the Austrialian Disco2 owners yahoo group (D2Au) regarding rotoflex failures using an optional tick a box online survey, and in a nutshell, the end result led me to believe that rotoflex failure could not be related to lift, age and km's travelled, but there was a relationship between tyre type and size and rotoflex failure. Based on this, it seems that people that run high traction tyres (MT+) which are oversized are significantly more prone to rotoflex failure. It's open to debate whether that is caused by the general driving technique of the demographic that have those modifications, or if it relates to the available traction and peak forces generated by those tyres and I could not conclusively say, though I would guess that it's a combination of both.Reddo wrote:Yup, cause the roto flex coupling is not as strong, and perishes over time and fails. Good for the burbs, but no good for the bush. Ditch it
Also bear in mind that the D2 generates minimal flex in the rotoflex with lift and suspension cycling, unlike the other Rovers, so this may not necessarily apply to the D1.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Who is online
Users browsing this forum: No registered users and 4 guests