Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to get body blocks???

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 76
Joined: Thu Sep 11, 2003 6:30 pm
Location: Glenwood, Sydney

Contact:
Contact Dave Fogwill

Where to get body blocks???

Post by Dave Fogwill »

Hi,

I am planning to do a body lift in the next couple of weeks. I have read all of the past posts on this topic and i think me and some mates can manage the job.

I was going to buy the blocks from offroad industries, (formerly Chaos 4x4) for $20 each including bolts... These are the nylon type blocks, the guys at chaos machine them to the height that you want.

Do you think this is a reasonable price..

Thanks

Dave.
1994 Feroza SX II 2 inch suspension lift, 2.5 inch body lift, 31 inch Pro Comp X-terains, extractors and sports exhaust.

www.geocities.com/davefogwill
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

Yeah Dave, that sounds alright. I got quoted $200 for the blocks and bolts through Big Balls Offroad.

You have their number???? I'm buying them for xmas to fit before the new year.
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 76
Joined: Thu Sep 11, 2003 6:30 pm
Location: Glenwood, Sydney

Contact:
Contact Dave Fogwill

Post by Dave Fogwill »

The number is (02) 9748 1116.

They are not bad down there, they are at silverwater just off silverwater road. There are some big trucks down there at times. I had my custom shackles made there for $200. They have been fine so far...
1994 Feroza SX II 2 inch suspension lift, 2.5 inch body lift, 31 inch Pro Comp X-terains, extractors and sports exhaust.

www.geocities.com/davefogwill
Top
Posts: 410
Joined: Tue Jul 29, 2003 8:43 am
Location: Colorado Springs, Colorado

Post by Toyhatsu »

Dave,

You might check and see if any Oz manufacturers make a body lift for an `86-`89 Toyota 4Runner. The 4Runner uses ten body mounts just like the Feroza. My Performance Accessories kit was $68.00 US.
Top
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Re: Where to get body blocks???

Post by Area54 »

Dave Fogwill wrote:Hi,

I am planning to do a body lift in the next couple of weeks. I have read all of the past posts on this topic and i think me and some mates can manage the job.

I was going to buy the blocks from offroad industries, (formerly Chaos 4x4) for $20 each including bolts... These are the nylon type blocks, the guys at chaos machine them to the height that you want.

Do you think this is a reasonable price..

Thanks

Dave.


Yep that sounds quite good, especially including the bolts. Support these guys - they are top blokes making good gear in a tough industry.
Built, not bought.
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 0 guests