Outer Limits 4x4 Board

Just chasing some feedback from someone that has tried one??

I`ve got there RTC dampener at the moment but not convinced it works
that well. I get alot of feeling/shimmy thru the steering wheel, was thinking one of ther adjustable ones might help fix this.

Any help appreciated.
Cheers Pip.

I was with my mate when this happened, the fusible link had burnt/melted. Which as yet we cant find a reason for. We tried to bypass it and also replace it, but still could not get any power to the glow plug/ filter lights on the dash, which we assume the stop soliniod on the pump is on the same ...

I need to do pinion bearing in the rear diff of my 80series, was wondering if its a job worth tackling myself?? or leave for a specialist. Also whats involved in getting my LSD to work again (eg Re-Shimming), ideally I would love an air locker but funds wont allow that yet. Does anyone no of a good ...

I got my tough dog kit thru someone I no, retails for $2800 I was told.
I paid $2100 including steering dampner.
The kit included: springs, adj shocks, caster plates, adj panard rods f/r
and brake hoses.

I havnt modified my brake load adj yet.

Hey there sniper, I`ve recentlly had the same issue as you. I went 6 inch lift, bottom of rim to underneath flare/wheelarch is 940mm but Im told will drop a little. 36`s just scrub at full flex. Additional things on top of buying complete tough dog kit are: RTC steering dampner. Extended Diff ...

Just to give you some sort of idea, I paid $40 a tube for 36`s.
doesnt help you with your size tyre but might give u an idea.

I`ve put in the tough dog soft 6 inch lift, was told with accecories it will drop to a good 5 inch. but I couldnt drive it with front shaft in untill i got double cardon. Still not happy thats why i want to get second opinion. Drove fine before lift went in. Getting part time kit today, but that ...

Does anyone know of e good driveline/driveshaft company in melb,
prefer south east suburbs?

I have an 80 series cruiser, after fitting lift kit I have driveline issues.
I have fitted a double cardon joint to front shaft but hasnt fixed problem completly.

Thanks dow50r thats the sort of info I needed, got th e driveshaft mob
pricing me one, he has a rear shaft out of 2006 hilux sitting there with the same setup as you mentioned.

Fingers crossed. Cheers.

There has to be some toyota guru out there that can help me??? I have spaced g/box-transfer crossmember down 10mm, didnt want to go to much as I will then put load/ stress on engine mounts. If I remember right, I have read where someone cut 10mm out of tor/rear arms but this contridics what ...

No centre diff lock wasnt in, but i did try it, noise and vibrations still there. I`ve been to 2 driveshaft places and neither could help me tha much, they said it would be trial and error. 4wd places dont want to no about it either as i guess i never paid them $800 installation, with doing the work ...

After fitting 5inch tough dog lift kit to an 80 series I now have bad vibration/chattering sounds. Uni`s are ok, removed front shaft and problem 90% fixed. Spaced down g/box tranfer case 10mm, still no differance. Will lenghtening top rear arms help? And what do I do with the front shaft? Does a ...

Hi there all, just chasing some resent opinions from people regarding these two types of tyres.
I have asked around but only one person has run swampers that i spoke to.
Im looking at 36x12.5x16, on an 80series cruiser.

Cheeers, Any advise appreciated.

Hi there, I hope someone out there can give me some helpfull advise! I`ve just purchased a 93 petrol 80 series, I have contacted a few 4wd stores and get alot of differant advise. Im wanting to fit 35 simex under it, my question is: What size lift works best??? One place said 2inch body, 2inch ...

Thanks everyone 4 the tips, Im sorting the 50mm body lift / tray at the
moment, then some springs to follow unsure of what make yet but thats
a big question on its own. Will give it a run then sort out diff location if needed i geuss.

Cheers guys.

Was wondering who out there has fitted 35`s on a 75series ute?
I was thinking of a 2 inch body lift and 2 inch springs, will this be
enough? Are there any other problems I should look out for.
Any help much appreciated.

Ive done a turbo set up couple years ago on a hilux, 22r petrol motor. Oooh it is worth it, no internal engine mods and it doubled its KW at the wheels! Mainly ran lpg as couldnt stop it from pinging on petrol. That also was a early 90`s model, a bit trickier with something newer and fuel injected ...

Hey there, like loanrangie said the goo is just a build up of crap from the gas. No not flammable. Personaly I would pull the cover of your converter and clean the diaghram, do the same with your mixer (guessing it would be an impco 225) it can play a little with your gas adjustments. If the motor ...

Thanks everyone for the reply`s, that helps me out. A mate has a hilux pump in his shed, which he said I can have, that way I dont have to chase another type up. As for the york pump, starting to run out of room to fit it but thanks anyway! I also thought that a cheap compressor would have all the ...

I would have to say yes there is a differance in lpg at differant
servo`s. Like mentioned earlier depends on mixture of propane/butane.

Sometimes I find it alters the idle mixture, rough idle/hard starting, although not as noticable in higher revs.
Then next fill up might be all ok.

Hey there all hoping someone can answer a couple of quastions! Have spent alot of time reading most of the posts on this subject, so please dont give me heaps and tell me to use "search". 1: What vehicles have the Sandon 508 compressor? 2: Will the comp off a early 90`s Hilux do the job? 3: Everyone ...

With doing this mod I might get my 45 cruiser to stop, any tips on what the most popular calliper to use is, without the h/brake set up?
As ive still got H/brake set up on back of transfer.

Im no guru painter, but have done a few cars in the past, I would say do all ur repairs lightly rub whole car back (no need to go back to original paint) then use primer/filler.
That then isolates paintwork underneath, then do ur top coat.
Thats worked 4 me in the past, hope it helps you out a little.

Dont no if its any help but on many occasions ive put 2 pack clear
over the top of ordinary quick dry enamel, and that works a treat.
they are smaller items than a car, but principal is the same.