Outer Limits 4x4 Board

how much for the 80w kits? do they come in hi/low?

where the injector pump bolts to the engine, there is a line on the timing belt and one on the injector pump. Loosen the injector pump rotate it till these line up and it should run a little better. You will probably need a mechanic's mirror to see it properly, it is kinda hard to see but if you ...

have you checked the timing mark on the side of the injector pump itself?

I have been told to get centre hung float bowls as they have a bigger float and don't get as affected by angles as side hung floats, and also to keep an eye on your fuel pressure, keep it around 4.5 to 5psi.

how does a scavenged floatless bowl work? What is required to set one up?

hey am wondering how an auto box like that costs to set up for the auto?

I have a hilux with vs v6 engine 4.5 diffs, goes good but probably could be a little lower, have a mate with vr v6 4.1 diffs and he uses more fuel than i do so i would say that they are starting to get a little low. I would probably say that 4.3 would be as low as i would go.

thanks i will try and find his number and see what i can find out, thanks for the replies

Hi all, i have an 80 series i am thinking of cutting to a ute, but was wondering what would be required engineering wise to get it passed, what are the major points of interest to the engineer?? I know this conversion is very common so it can be done with no worries, oh yeah i am in qld so if that ...

How free should a turbo spin? I grabbed mine to check for play, spun it with my fingers and it turns freely but there is resistance there, like when i give it a spin with my fingers it stop's as soon as i let go. Is this normal, or should it free spin a little? Could this be acting slightly as a ...

no don't have a leak in the intake at all, i thought that this seemed a bit high when not even powering up hills.

Something that i should have probably mentioned that i am running 4.8 diffs, not to sure how much this affects this at all

yes the ute had a new radiator, and had the water flushed and new coolant put in, new thermostat so the cooling system should be fine. It is a water cooled turbo, and yes it is hooked up, but i read somewhere that it should have an inlet on one side of the turbo, and outlet on the other side of the ...

Beinthemud, when you say "t26", are you talking about the toyota ct26? or are you referring to a different turbo all together?

The radiator is new, and all clear, have also done a compression test and all checked out all right, doesn't use water or anything, After being on the highway for a while, half hour or so, i have noticed that the oil pressure is dropping. I was running 7 pound before adding the intercooler and it ...

not to sure if the leak down test was done, just when i got it checked out at the mechanic he said that he had checked out the compression and was all good, might find out weather the leak down test was done.
Have run some of the super cheap oil cleaner stuff when i put the oil cooler on so maby i ...

The radiator is new, and all clear, have also done a compression test and all checked out all right, doesn't use water or anything, After being on the highway for a while, half hour or so, i have noticed that the oil pressure is dropping. I was running 7 pound before adding the intercooler and it ...

yeah mate, got water to air intercooler set up on there, all works good, apart from it getting hot lol

it goes well, but when i pushed the boost upto 10 pound, started getting over heating problems, fitted an oil cooler, bigger radiator, egt gauge stays good, but oil temp rises and stuff so was wondering if the ct26 would help at all

hi all
i have a hilux with a ct20 turbo setup and am finding that the turbo is working hard making 10 pound, so was wondering if the larger ct26 would work on the smaller hilux motor?

Hi just been trying to use the search function on this and won't play ball, so i will ask a question that has been asked a million times,

I have a 2l hilux with the ct20 strapped to it, have cracked the head..... what i was wondering is if the heads of 3l will fit, weather they would be any ...

Hi just been trying to use the search function on this and won't play ball, so i will ask a question that has been asked a million times,

I have a 2l hilux with the ct20 strapped to it, have cracked the head..... what i was wondering is if the heads of 3l will fit, weather they would be any ...

yeah mact can to it no worries, mark's adapters will look after you with the parts required! But if you are thinking of keeping the manual box, get a different one, because it won't hold up to the power. this conversion in reasonably eaisy to do

Timmeh

Hi guy's, just wondering if it's possible to attach a 75' sieries trasfer to a 45' series box. Want cross member mount on 45 to replace rear engine mount. Have 77' model box, havn't got 75' trasfer. Wondering if anyone has tried this before?

i have driven around on 35's on a hilux for 5 yrs, been pulled over for the occasional rbt, and once by a cop who owned a hilux and wanted to know wat the best way to raise a hilux was!!! never been hasseled. My mate was defected the other day for running 33's on 2" lift with flairs and everything ...

I get that from the main tank, using premium unleaded. If you drive with a lead foot, which is mostly the reason for the turbo , consumption goes through the roof!!! but generally 400-450 around town driving normally.

I get that from the main tank, using premium unleaded. If you drive with a lead foot, which is mostly the reason for the turbo , consumption goes through the roof!!! but generally 400-450 around town driving normally. [/quote]

I have an auto 4.5 turbo intercooled 80, and depending on how you drive it, i get around 400-450 around town, and 500-550 on the hiway. Mike Vine turbo's at capalabah does them aswell, don't know his number, but it is in the yellow pages.

hi, nice work on the coil set-up, and the write up which you have done!! Just a quick question, what shocks are you using with this set-up ?

yeah, i dont the conversion myself, pretty simple and straight forward. My ute isn't in town at the moment, but i should have it in a couple of weeks, you are more than welcome to look at it then if you like.

Tim

yeah, i just got the reprogramed chip from marks adaptors, works a treat.

Tim