Outer Limits 4x4 Board

found it was a hose from flame trap to throttle body leaking smoke rising to incomming vent to heaters right in same line it was leaking from there into it as soon as i re cliped it back on no more smoke guys but still to work out why heater is not hot so next move is to clean heater core with a ...

not steam and no water loss

not steam and no water loss

this 1 has me scratching head heater is putting out smoke into cab via vents not an oil smell or a burning smell only when traveling looking in the book for air cond it says there is a vacum line to it to operate it ??? wondering if any one know where that goes too on air cond thinking that that ...

lumination makes the hall efect parts u want look via yahoo uk to find info on it went that way as was having dizzy probs my self untill i sorted it

:2gunfire: ok gentlemen and ladies some tech help for u all to ponder open dizzys up please remove the rulcuser/points plates below that is a cam for your centrif weights remove it and carefully look at it on top of it will find a number that tells you what advance it does ignore that ( found this ...

:multi: finally fixed the prob with the dizzy hairline crack in the top part of the shaft making the power from the wires jump to that its party time again thank god also found out when dizzy blew it took out the gas saftey switch aswell ( dont help does it ) lets in gas to start it then cuts out ...

all done brad and the prob is that it is lined up but shorts out at roter good spark off coil but for some reason is shorting out at rotor to cap rolled car over to tdc #1 lined up rotor at that point run lead for #1 to earth on car motor min spark when turning it over checked leads ok replaced ...

well just to let every 1 know have replaced the magnet in distributor cracked wire replaced trigger replaced rotor x3 /cap x4
still shorts to earth on it help please any ideas at all am now lost this has me beat

got 3 caps and tryed the lot
2 rotors tryed them
prob is why does it spark from rotor with no cap when is should not do that ( so it says in the org book when testing ? )
so have spark at coil to dizzy but cant get it to rotor to cap and leads to plugs correct

:bad-words: have a problem with my lucas dist hei type sep trigger and coil and need help big time to work it out here 2 wires to coils correct sends spark to cap no spark out to ( or min spark intermittant ) to plugs new cap new rotor tryed ht lead onto rotor and it sparks 2 diff rotors ( not right ...