Outer Limits 4x4 Board

check your brake light fuse. had the same problem.

same thing happened to me when i had a zuk i solved it enough to get home lucky i had a spare on the back that was tiny so i drove home on a angle. did u nearly go through the window? nah, didnt even notice it. just rubbing on the guard when i drove away i figured i ripped my plastic garden edging ...

Hey, after a good day of 4wd'n at ormeau I ended up with a bent front passenger spring. It happened when climbing out of a mudpit. I have since noticed that the rear shakle angle is closer to 45deg while the front drivers is closer to 70deg. And since I need to replace the spring was thinking of ...

My IPF 900's are 130w each, 22A total running. Just about to replace with 55w HID's so total running current will be In=6.4A so theres a 15.5A decrease straight up. Just another way around it plus alot more light.

hey, just got 31x11.5 mudzilla's on a 7inch rim. no problems other than clearance. virtual lift happening today and slight spring touching

About 1-2hours if you have 10mm, 12mm, ratchet, breaker bar, and extension bars. You will also need new coolant. The most difficult part is removing the radiator and fan shroud. Once out loosen alternator (12mm bolt), remove the belt. Remove the fan blades (10mm socket), then proceed to removing ...

Hi, I have a G16A MPI in my sierra and I have been trying to tuning it (haltech E6X). But recently I noticed cylinder 1 is also very rich (as in black on spark plug) while the other 3 are fine. I have swapped the injectors around with no luck. Just swapped the return line with the breather line from ...

I'm with Hybrid on this, my sierra with a g16a MPI (haltech powered) never has been pasted 91-92deg with stock 1.3 radiator, that was without the shroud. Installed the shroud and it stays below 87deg now. Just remember with a modified motor to let it have a break, a standard motor will overheat if ...

hey there, only got mine mod plated a few weeks ago. went from a 1.3 to 1.6 mpi (g16a) motor. drove in, drove out 30min later with a blue plate. this is in queensland, brisbane.

okie tonight lots of things happened :) heater hoses i just cut the standard one alot shorter thats about it. not much moding there. but the exciting part :D i have the new heart running, took a little bit problem with ignition module being faultly, than come home and got zapped by it so it works ...

hey, thanks nicbeer. found that link couple of days ago. me and my mate sorted it out, he welded it all up bare foot so a few little burns. motors is in now to, wiring mostly done. waiting on fuel pump, new distributor cap, rotor, ignitor and coil, air intake temp sensor, and get a cheap intake ...

yep, 800 just for engine with sensors. works out better in the end. Speedo is cable driven, and tacho see what happens should work. Hopefully all works.

Motor is a G16A MPFI got for 800, haltech kit was 1399. Just got my clutch, new engine mounts and machined fly wheel today, the motor was picked up yesterday. Just been cleaning the engine bay, gearbox looks brand new. :) Can't wait to install it this weekend, need to throw a sickie to start. But ...

Thanks nicbeer, but I’ve never heard of the sump problem before. Guess find more out once I get the new motor. I'm going with a 2inch suspension lift and custom body lift so engine clears. Also today old motor came out, and new list of things to get. -throw out bearing -clutch (throw out bearing ha ...

Hey all, Today I purchased a 1.6l 16v MPFI motor, adapter kit from suzisports and a haltech E6X ecu. This is to be fitted in my 91 sierra hardtop. I still have things to get but just after any information or anything I have left out. Thanks Things to get still: -high pressure fuel pump -fuel lines ...

hey all,

question is

i own a 91 hardtop sierra 1.3l if i was to get a 97/98 sierra front cut (motor, gearbox, transfer, dash, etc) would all that bolt in to mine?

dash is my main concern, as i would like to get one which has factory aircon

thanks

luke.

Hey, Recently I brought a 91 hardtop sierra good little beast just kept over heating on me, had a faulty water pump. So I got new timing belt and water pump replaced them everything was fine. Set the timing right etc. till the next morning when the motor was cold. It starts like a pig sits around ...