Outer Limits 4x4 Board

The bloke lives down gladstone way and his username is mosko111.
Try this thread
http://www.outerlimits4x4.com/ftopic173799.php
Cheers

Can be done no worries, Put a high pinion factory locker into the ass end of mine. You will need a front housing and gearset, with a rear pinion flange and hemisphere to match splines. This will be driving on the coast side of the teeth so can be a little noisy but have seen some big hp put through ...

hey mate, I would be checking the return filter, from memory it sits on top of the oil tank and usually has a filter guage on it. might be able to pull it out and give it a quick run just to see. The rattle noise in the pump sounds like it is cavitating, make sure your feed line is free and there is ...

Sorry it took me a while to get back
Thanks for the replies
was thinking 1500 max, just need it gone, I am sick of it getting in the way

Cheers

Hey guys, I realise this isn't a tech question but thought that the mitsi fans might have a better idea I have a 93 gls wagon sitting under my house that I want to get rid of I had a boil over one day and thought that is was a head gasket because i was getting pressure into the radiator and a lot of ...

Cheers for the help.
I rang up 4wd1 today and they told me that 100 pound would be way too much.
think I might just have to put a guage in line with the ranco ones and see what the equivilent psi is when it says "9" on the incab

Cheers
Lain

Just a quick one,
I have killed a rancho compressor and was wondering if anyone knows what psi the shocks run at full pressure. I am planning on using my locker
pump but not sure if 100psi will do it.

Cheers
Lain

Hey, just a quick one
As per the rules on your website do all trucks with a winch need the list of recovery gear as stated for a 'Winch vehicle' or is it just one nominated truck per team and the others have the minmum kit.

Cheers