Outer Limits 4x4 Board

3 run 2 layer and bore the amps into the thicker material, she'll be right!!!

I have 2 IFS lux's and am happy with them, like everyone here has already said, its a horse's for courses compromise thing.
I have taken them everywhere I have needed to go.
I agree Driver ability has a lot to do with it.

Whilst on the wheel brng topic, how does everyone set there brngs, as in how tight then how far back,

RTFM! there is only one right way.

I know that, but i have herd, many different 'bush mechanics' version,
I work with brngs for a crust, so I got 1/2 an idea what I am dooing, :finger:
just ...

Have been looking at the ones on e-bay myself, I am a fitter/welder and we run cig & esseti machines at work, but it is a cost justification, just depends on how much work you do, Have been looking at the Tig/stick/plasma, ones t, probably not real good as far as pulse curves and the like but for ...

Whilst on the wheel brng topic, how does everyone set there brngs, as in how tight then how far back,

RTFM! there is only one right way.

I know that, but i have herd, many different 'bush mechanics' version,
I work with brngs for a crust, so I got 1/2 an idea what I am dooing, :finger:
just ...

I think you are right with the 52mm,
Whilst on the wheel brng topic, how does everyone set there brngs, as in how tight then how far back, Interested to see how many different opinions there are on this one???

After much research I have just put a set of BFG AT's 31's 10.5 15 on my duel cab hilux and am very happy with them.
Also put Maxxis muddies 32's 10.5 15 on the X-cab, CHEAP but develop quiet a bit of vibration and noise.
Mate has just put Wranglers 32's on his lux and they seem good to.
I had ...

jaymes wrote:thinking of fitting X link to my GQ just wondering if any one has fitted one and how well they work

PM the Professor, he can help you, he is the X-link man, not a bad bloke either

The guy who used to own Barjo Bullbars sold up and became the NSW distributor for Maxxis tyres.

Thats why there so cheap in Bathurst, Thats where there located.

Nick
Don't think that is the case anymore, I will check on it tomorrow,

Distributer in Bathurst is Beaurepairs, Guy that owns it is ...

Can u run a wireless cam to the pda ???
viewing with win media player???
or would you need software to run it???
Never tried so don't know!

I am running a Dell Axim 51 with Ozi , compact flash gps + have to run a 4gb sd card for maps, it gets 'chuggy' from time to time and freezes up for a short time,not too much of a drama but now have to load co-pilot live compact edition on or some other form of navi software, tomtom etc, possibly ...

cheers thanks all, passed it on to the aprenti' reckons for $4500 he might grab it anyway, wants it for his piggin rig!

Greetings
Apprentice asked me a question today ,re-gearbox in a 96 lux 2.8D, says it only has a 4 speed in it and 4th is real tall, my reply is that it should have a 5spd, they were 5spd from about 82-83 ish on??,Can Anyone offer some advice/info?? or could an older g/box be fitted..
Cheers'
Bretto

Sounds like POO!![/quote]

Yeah cold white poop!!!!

Has been a lot more snow round since last post Sam looks like snow again tonight, F#&kin cold enuf, could be fun..... not long to go now~~
Bretto

either beer, water of rum worx!!

Buy a new one , then the water pistol idea is simple== remove top- wash out fill with H2O- leave a little head space-charge up with compressor & bingo Water pistol, work good too, I got a 9kg one,

probably a bit late now but did you look at sleeving the bar, as in finding a bit if thin walled pipe that fit snug and weld it to either the bar of the carrier, putting a nylon disc, like a washer between the 2 may also also help..

Boating Camping Fishing.

I had only heard of them when i was in WA. I dont think we have any in or near newcastle. not sure on sydney??

On parramatta rd around auburn area opposite the 3 story home mega mall joint, in with office works and some electrical mob on the south side of the road, what ...

may pay to look into different grades of steel, not sure off the top of my head but something with say more chromium or a lower carbon steel, heading down the coefficient of friction / metallurgy line here with regards to better head transfer/ dispersion if you get my drift!?!?!?!

Tafe use to run a course called agricultural welding farm or somefink like that, they use to take them in with the tradies on stick 1 and welding and thermal cutting courses, when I was a boy... IMO learn the basics on stick go mig, & then tig much easier and neater..

When I worked for BP a few years ago, they supplied alpine diesel here in Bathurst, but I think the concentration of the 'anti-freeze' can vary, not sure if they still do.
Diesel will freeze here , we had trucks(fire) freezing up here a few years ago in the frost, also had the pumps on the back ...

Well I had the pipe done, the bloke who installed it for me use an adaptor plate ordered from melbourne that bolted onto the bum end of the turbo, he then made a new 3in pipe to suit the plate.
All I can say is, if you are considering doing this, GO FOR IT!.
The power is much better.

you wouldn't ...

Firstly Greetings all, first post on the forum, been cruzin around in the shadows reading, learning, came here specifically looking for info on this subject, I am looking into the exact same thing, Have 2 lux's 91 ifs X-cab 2.4 petrol the project in question, and an 04 D-cab sr5 3TD, my only ...