Outer Limits 4x4 Board

Hi,
you can try with the "technic" of the "double nut":
You have to put and lock another nut on the stud, then you have to unscrew the original nut. Practically uncrewing the original nut will force on the second nut as a head bold.
Ciao
Ach

All,
Thanks for the suggestions.

Murcod,
where is located the Temperature Controlled Idle speed and how did you reached it in order to lubricate with WD40 ?
Thanks
Achille

Hi, yesterday i remained blocked in a traffic jam due to a car-crash. For 20 min the car speed was at human walking (old) speed with frequent stop and go. The water temperature indicator remained at 3/4 (below the critical level) This is quite common in Italy but this time the RPM of the engine at ...

Finally i had time to check also the Temp Sensor as suggested by Murcod...
Everithing OK....
So i am at the starting point...
What else i can check ?
Somebody told me to cleam all the injection system using a Fuel injector cleaner into the tank.
What do you thick ?
Desperate..
Achille

Hallo and thanks for the suggestions: i checked the O2 using all Murcod suggetions: the O2 sensor is OK I was looking for the Temp. sensor (below the distributor) w/o success. I was completely layed down ON the engine , but was not able to reach it. Do you have a picture how is made ? How do you ...

My Feroza 1,6i, year 1990 and with 150.000 Km
with 225/70/15 :
at 4000 rpm: 120 Km/h
full speed: ~ 150 Km/h
Ciao
Achille

Hi guys, i am having an issue with the consumption of my Feroza 1,6i of the 1990. I am currently at 7 Km/liter, but , from the last time i checked (about 5 weeks ago) was 10-11 Km /liter !!! I have not changed anything from that time and the car is , or at least seem to be OK. (No power loss ...

Hi SimplePV
unfortunally the hardtop (including the windows) already gone :-((
I will let you informed if i will see around something
Ciao
Achille

Hi,
he has the original Diffs (both front and rear), you can see all the components in the part of the manual referred to Front/Rear diff (paragraph DF)
PS: the guy is not a friend of mine, i only bought some parts for my Feroza....
Ciao
Achille

In case you are interested on used parts for Feroza narrow track F300, here below an email of a guy in Italy who is selling a complete car as spare parts (excluding the engine): the e-mail is: iprimini@libero.it the cell-phone is 0039 337 620584 (Cristian). I am not sure about his english knowledge ...

The only jeep rims that fit on a Feroza are of the CJ series
Ciao
Achille

Thanks Chatto, i found it.
you are right, this is very easy for the transfer.

What about the Gear Box ?
Ciao

Sorry for the stupid question:
could you please indicate (or better post a pictures) of the plugs where fill the oil for Transfer and for Gear ?
Thanks
Achille

Hallo, i am having an issue with the O2 light in my Feroza F300: when i am running at 4500 rpm the light came on, as soon i reduce the speed the light came off. I changed the sensor 8 monthsa ago and now it has 15.000 Km. Additional info: K&N air filter and Black-box Lukey extractor Any tips ...

Hi,
in case of your interest
seems that TRANSTAD in Italy makes Diff-lock for Daihatsu
http://www.transtad.it/default.asp
Ciao
Ach

Hi from Italy.
Do you know which Koni shocks fit on a Feroza F300 year 1991 narrow track ?
Thanks
Achille

The ones in the far rear are accessable
from below.  It is a double threaded bolt that will come out from the bottom
using 2 nuts sinched together. 
Achille

The ones in the far rear are accessable
from below.  It is a double threaded bolt that will come out from the bottom
using 2 nuts sinched together. 
Achille

Hallo, just to alert you on incredible experience i had with HotBits: i live in Italy and was looking for a exaust header for my Feroza so i get in contact with Hot Bits (Andrew Holdsworth) at Dandenong, Victoria AUS. On mid SEPTEMBER 03 they offered the exaust code HBEM-40-339S (steel, mandrel bent ...

I have a Ramsey REP 8000 winch and would like to install it on my Feroza.
Do you ahve tips, pictures how and mainly WHERE to install it ?
Thanks
Achille (Italy)