Outer Limits 4x4 Board

Does anyone know if a gen 1 bullbar will go onto a gen2? Want to upgrade my alloy one to a arb winch bar and the only one I an find second hand is gen 1 NF and I have a NK
Cheers guys

over here its quiet strict -learners permit at age 16, for 1 year must have a full licenced driver at all times limited to 80 km/h and must do 120hours driving.. can drive any car, V8, turbo etc -Provisional 1 at age 17, for 1 year can drive alone limited to 90 km/h cant drive V8, Turbo.. can if its ...

Hey guys has anyone put a newer motor like a 3.2 DiD into an older model that had a 2.8itd??

hey im sure some people out there have done it, wat have u guys done and how has it helped.. i have a nk 2.8 itd and was thinking from turbo back, dump pipe and 2.5" through with hi flow cat and muffler??

oh ok, wonder y that is you would think they would be heavier and that.. wats your fuel consumption like on 35's

how do you go with braking cv's and axels when your running 35's.. and just general strain on everything

yea my bad read up on it and its only the 3 brake lights, the one in the door and two i the bumper so it was only a globe in bottom left light.. owned since new in 97 and just found out it has rear fog lights..lol

i have a brake light problem on nk, out of the 4 brake lights only the right hand bumber brake light works, the other 3 dont, the globes are fine and the fuse isnt blown, obviously cause one still works., any had this happen or have an answer?? cheers

If u ran the same tyre just in a bigger tyre will it use that much extra fuel.. say 31s to 33s?

Thanks heaps for all the info, yea still deciding at the moment its not my every day driver but shortly it may be and doing 900kms a week dont want to be running massive tyres so ill have to see.. might just go some lockers F+R.. any one else got info on wat they have down and how it works.. good or ...

hey mate, you not sure at to do. does seem like alot of work and mostly money, its either that or put a arb locker in the front and maybe rear would be heaps cheaper, i just like the thought of the extra hight and strenght of axle/cvs u get with a solid axel.. and dont really wanna buy another forby ...

Hi Guys trying to do some research and still learning, with doing a SAS do the diff ratios have to be same as standard if u are changing the rear diff, i have a nk 2.8 itd which i beleive has 4.9 diff ratio's so if u put gq diffs under it with 4.1's would this matter? i beleive this would make the ...

was looking throught the latest 4WD custom Guide and seen an add for these guys this link is for a Hilux SAS, but in the add u can buy the DIY kit for $6450, wonder if anyone will do something like this for the paj?!?! http://www.navara.asia/general-tech-talk/5577-05-hilux-buds-customs-sas-d40-next ...

hey Drides
wat have you got done to ur paj??

U say tyres are r15 and your wheels are 16s?? They won't fit

Hey guys weres the best place to get a 2" body lift kit? Or is it easier to go and buy bolts and blocks separately??

I tried cruiser rims on my nk glx once with no flares and they stuck out alot, they are -25 offset where as my wheels now are +10 and the still just stick out from guard, both 15x7 with 31s

so when people say they have done a 2" body lift is that keeping the existing rubber ones and adding 2" or replacing the rubber ones?

hey mate, im just about to do my nk.. have spoken to leco's at work n im just gettin a red arc smart start solenoid of ebay for about $100, battery cradle of ebaymade to suit the paj bout $170 then just need your battery.. im using 35mm2 cable just run it from your positive on your main battery ...

I've read bits and peices on it just a couple of final questions. Weres the best spot to jack the body from without damaging it? And does anyone know a list of bolt sizes for the 50mm lift on lwb

Hey guys has anyone posted a thread of how to build one of those stainless snorkels??

Hi everyone have got a nk and want to do a body lift but the link on the tech data base isn't working.. Does anyone know of another link or a similar "how to".
Cheers

ok.. well all things to consider.. will just have to keep looking and hopefully get one at a half decent price. some of you guys saying3.4 not as good as 2.7 all round.. and some issues with 3.4.i had a mate who had a 2.7 last year and it hammerd

yea just looking at getting a petrol hilux. either 2.7 or 3.4 v6... any one own know how much fuel they use?? and if they are any good on gas, thanks

HI I am lookin at selling my pajero and just wondered what you thought it was worth?? i need to buy a little run around car for work because i am travelling about 700km a week so the paj has to go. Here is some info 1996 2.8 ITD LWB Navy blue 310XXX kms serviced every 10,000kms I have owned it since ...

This is some pics of the old lwb i have.. needs heaps of work, has no interior.. only a dash, motor barely goes, rust in roof. anyway its probably possible with a heap of work.. i was thinking. 1.6, 33s, maybe spoa, cuatom tray...you guys got any ideas to make it a capable little for http://i284 ...

hey guys, thanks for the advice.. i have an old lwb down the back that needs alot of work. i have a pajero at the moment so im not needing a car and could build that up its a 1lt 4 speed cab chasis. but needs alot of work. i wouldnt know where to start.. the engine barely runs..where and how much ...

hi want to buy a sierra but am not sure weather to buy one alreay done up or do a build up. i know it will probably be cheaper to buy one already done but i dont have the money straight up.. can you guys give me some advice on prices and best option for these thing 1.6 conversion suspension work ...

fazza81, where did you get yours done for that price?
so 2.5" sounds the way to go ay.
with increasing the bost on the turbo, how do you do that? maybe i should leave that alone for now as i dont know how to do it...

hey thanks guys, will ring them today
anyone else got info relevant to size etc?