Outer Limits 4x4 Board

have a look around the steering box for cracks in the chassis, not too big a drama to fix if there is. Rust up where the front gaurds bolt onto the body. Pretty bulletproof if they have been reasonably well looked after.

ours are made from craftwood and have survived two trips through the territory/WA and this last trip included the Gibb as well as Cape Leveque. Had 1 draw full of food the other parts/tools/lights etc. Got through without a scratch

fitted a Marks kit to our 80 (only because kit came with it when we bought it). To be honest unless you are worried about front diff wear and tear (unlikely) save your funds and dont bother with it. The only difference with ours was a very slight reduction in driveline shunt when you lift the foot o...

prob best way is to heat it in a pot on the stove with a thermometer to tell what temp it opens and so you can see if it opens up properly

got a workshop manual for XF here somewhere if you need any info drop me a pm

could you trace it through the seller in your feedback?

my 92 model 80 has a factory badged remote opener on it, gather it was factory fitted?

JACK BAKER TYREPOWER
ADDRESS: 219 Currie St, ADELAIDE , SA, 5000
CONTACT: TERRY
PHONE: 08 8410 1312
FAX: 08 8410 5014
Try this one out

Running some Gas spec leads from ICE Ignition in Melb on my duel fuel Falcon. Rang him and paid over the phone at 4pm and they arrived in the post the next day, no idea how he managed that. Great service and he offered 300,000 k warranty on them, boots are easy to get off as well. Definately worth s...

Seen them on EBay with a 3 year warranty, so cant be too bad esp at the price. Will be getting one when I get my tax back hopefully

Hi Chris, if you pm me your email I will send you through a diagram.
Cheers Darren

Thanks guys, will have to ring the local dealer and see how big a heart attack the price is now.

Are the genuine ones any different/better than equivalent Ryco etc? What sort of price do they generally cost for a genuine one, Ryco ones here are around $26

A mate just bought a brand new genuine Toyota long motor for his 80, was $6800 plus frieght and came with a 12 month warranty as well.

A winchoff would be a good idea for comparison. But really comparing a 12000lb Tigerz with plasma that costs $725 with a 12000lb Warn that with plasma would be over $2500 really isnt apples with apples. Even a similarly equipped 9000lb Warn would be worth around $2000. Anyone expecting to get the sa...

Thanks guys, will look at these or the Tigerz one thats been posted up. Bit more $$ but bigger capacity and rope as std sounds good for the price. Just need to either mod my std bar or find a winchbar

Looking at an Ironman Winch as with my limited use time cant justify the $s for a Warn. Anyone used one good/bad experiences? Looking at a 9500lb to go on an 80 series

Thanks Duck, wrestled the trim off and the lock pat was stuck half way between locked/unlocked. Found a small broken spring in the bottom of the door that must be what drags it one way or the other. Anyone know what a new locking mechanism is worth off hand? Are there any non genuine ones as I have ...

Drivers door wont unlock from inside or out or with the remote? Anyone got any idea how I can get it open and what may be broken. Thanks

Are the gearboxes all the same in 80`s, ie Turbo and non the same? My Turbo 80 box is a bit average on the 1-2 shift when cold, if it is the same will change to this oil and see if it helps