Outer Limits 4x4 Board

Hello, 1.much more pleasant on about 95km/p(will do more if you want to push it) 2.ive got 420,000km on my 2H,she is abit fumey,but starts well and runs like a clock. 3.if you needed a tow car a 60 is a good choice.dont be concerned. 4.i have a 2inch lift with 33x10.5x15,work really well on and off ...

i guess new ones would be the way to go.....

Hello,other than $60 each genuine Toyota,does anyone know where i can buy some standard replacement mounts from?Any feedfack would be appreciated.

i was sort of looking for abit of a step by step guide.its always better to get good and accurate advice before attempting something.

I have a hj60 with a 2H,5 speed and would like some advise on removing the gearbox.Is it a one man job at home? Are there any tricks?

I have a 60 series with a 2h in it.Sometimes when travelling and using the brakes the pedal goes very hard and the brakes don't work well.It is not that the brakes have over heated because it can sometimes happen when i need to use the brakes often in a short period of time,althought the brakes have ...

Spoke to Auto Elect about re-gassing my air cond,he said that its an old system and needs a retro-fit to accept new gas type.As i do not know how long since system was working there maybe leaks and other issues.Would any one like to recommend someone for a second opinion or am i wasting alot of time ...

Yesterday in put about 30 litres of diesel in my 60 series.After doing that it did not registar on the fuel gauge.Later that day after doing about 30km it seems to have run out of fuel.Ive checked for leaks,found none.Any suggestions please.

Where is the best place to purchase standard replacement body mounts for a 60 series?

Where do i get myself a 45mm socket?Checked tool shops,sizes go 43mm,46mm(no 45).Any ideas?

Sounds interesting!Theory seems logical!

I had a go at replacing the front crank seal today,however,i couldn't get the bolt undone.The issue was i couldn't stop the engine from turning(i think due to the fact that the old girl is LOW in compression)So without the convenience of a rattle gun,what is a good method?

Cool,thanks for that.Any secret tricks to replacing seal?

Can any one tell me the socket size required to undo the harmonic balancer bolt on the front of a 2H motor.Looks big.

Just did a tapett adjustment on my recently purchased 60 series, 400 thou,2H Turbo.Removed rocker cover to be welcome by alot of black sludge.What to do?Just do normal oil changes,or give the old girl an engine flush?

Well that's me story and i'm sticking to it!!

All is well that ends well!After getting somewhat wet a little abit of swearing,she is out>>>>>Obivously to hard for previous owner,as he had created a little monster.i ended up filling it to make a square and got a 19mm open end spanner and hit it.Have not yet dropped the drain plug but am quite ...

i've started filling to flats either side,with the plan of using an open ended spanner,a givingthe spanner a hit with a hammer to try and crack the seal.

Thanks for that,its just sometimes the simple things in life give you the most grive.I Will attempt the hammer and chisel method,just getting somewhat concerned cause there isn;t much of the plug head to play with.

Can you weld onto soft alloy?If so i think welding a nut on and then using a spanner would seem the way to go.ive had a set of locking pilers on it with good grip but it just keeps chewing the plug(whats left of it)away.The plumbers wrench has done the same.It seems very tight.

Good point,i mean the head is VERY rounded.It seems to be some kind of softish metal,perhaps alloy.The best option maybe to try and weld/mig some kind of nut to it,however i'm not equiped to such a job.

Due to the long range fuel tank being about 10cm from the plug access is somewhat limited.No mig.

I need help removing a VERY stripped tranfer case filler plug on my hj60.Recently purchased car and have a desire to change oil.(not even sure if it's got oil in it)

Hello,does anyone know if the felt/seal in the sliding windows is available?

Just purchased HJ60 Diesel with an ARB aftermarket turbo kit.Runs well,but would like someone in the know to service/tune.Any recommendations?
P.S NEED NOT CHARGE LIKE A WOUNDED BULL!

What is the largest tyre possible to fit these rims?