Outer Limits 4x4 Board

thanks coxy321
now i know where it should goto

ok looked thru the manual in the A/C section and i have found it.
its a F.I.C.D Fast Idle Control Device. does anyone know where the vacuum hose that im missing should connect too??

Hi just wondering what this part is on my NIssan Patrol Mq L28 motor, i think it is a manifold pressure sensor but could be wrong, as im installing a jaycar programmable ignition timing system. it has 2 electrical connectors and has a vacuum hose that goes to the manifold, also im missing a hose off ...

Hi guys
The last problem that im now facing is when im cranking over the motor.
When i turn it over the cranking slows right down for 1 revolution and then give in acouple of minutes and it returns back to how it normally cranks like has anyone got any ideas to what is happening...

Thanks jcclures im going to check the filters tonight

Hi does anyone know what the PSI and flow rate is for the standard Nissan electirc fuel pump??

Thanks for the people that helped with my last problem with my MQ not have any spark. i have it all up and running now but im having a fuel problem, it starts and idles well till i give it a nice long rev, then when i try a rev it again its like the fuel is starving and the carbie can't refill quick ...

wondering if anybody can help me find the problem with my MQ with a L28 engine non efi. i fixed the problem that i first had with the cam beening out of time, now i have the problem there is no spark, so i changed the points, cap, rotor buttom & coil and cleaned & dryed out the distributor with a ...

Hi i was wondering if anybody from melbourne got a N42 or P90-P90a in good condition?? i would be very happy to pay for it...

i have just done a head gasket and got every things back my engine (L28) and when it try to start it and the engine is turning over an at times getting a back fire and also theirs emissons or fuel fumes coming out the top of the carby (weber) when its turning over. i have checked the firing order ...

forgot to add its also a carby model with standard nissan manifold and has n42 head

Hi is there any that can help me...i have just done a head gasket and just fitted everything back up, just wondering if anybody has under bonnet pics of a L28 engine thats running, so i can see if all my cooling & heating system hoses are conneted right. If any one does it would be a great help....

thanks for the help

Hi does anybody know the tightening order for a L28 head, I have the workshop manual with diagram of the tightening order but it doesnt show which way is the front of the is head.

Here is a link to a copy of the diagram i have.

http://i20.photobucket.com/albums/b206/ ... torder.jpg

Thanks