Outer Limits 4x4 Board

Angle grinder and start choppin,
If you cant weld make friends with someone who can.
Then a bit of bog and paint, then you need to sort out the electrics and interior.
just talk to an engineer first so they are satisfied with how your doing it,
It cost a mate of mine about $2500 all up.

Did you check the condition of the ring gear on the fly wheel ?
Make sure it isnt chewed up

Ive managed to change the valve stem seals on a 6g72 without removing the heads, i believe on the 6g74 heads need to be removed.

Mate it looks like the winch is high enough, cant go any higher.
From what i think the clutch lever should stick out far enough so when the clutch housing is rotated to point the lever to the top of the bar it should stick out.[/img]

Best option is to rotate the clutch housing so the clutch release handle is at the top of the winch, you will only need a large enough hole for the lever to stick out of. I was thinking of doing that but in my case the winch isn't high enough in the bar to get near the handle, you'd need a decent ...

Best option is to rotate the clutch housing so the clutch release handle is at the top of the winch, you will only need a large enough hole for the lever to stick out of.

hey guys everything wet well swapping everything over bar one thing the engine cranks but dont start...its got spark but wont kick over anyone had simmilar problems the timing belt was put on correctly and everythig seems to be all good...the only sign i have that something could be wrong is that ...