Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Search found 20 matches
- Wed Nov 09, 2011 9:44 pm
- Forum: Cruiser / Prado
- Topic: 3b shorty turbo overheating problems
- Replies: 4
- Views: 437
Re: 3b shorty turbo overheating problems
cheers lads apparently he Put a brand new viscous fan hub on and changed the temp sender last week still no change. got a digital temperature gauge tonight will install it and test over the weekend to see what temps are getting to incase the gauge in the dash is shagged. what do your temp gauges sit ...
- Tue Nov 08, 2011 10:23 pm
- Forum: Cruiser / Prado
- Topic: 3b shorty turbo overheating problems
- Replies: 4
- Views: 437
3b shorty turbo overheating problems
my mate has a shorty with a 3b with aftermarket turbo on it (non intercooled) running 10psi with very conservative fuel delivery EGt's never get over 420deg post turbo. going up the freeway in adelaide (the big hill) unloaded it gets warm ish, with the aircon on it gets to the red line. holding it ...
- Sun Jul 24, 2011 4:31 pm
- Forum: Cruiser / Prado
- Topic: 75 tub tray flares
- Replies: 0
- Views: 153
75 tub tray flares
does anyone know if the fibreglass flares that come on the new v8 ute tubs will fit an older 75 series tub or are the wheel arches different size? cheers
- Wed Apr 06, 2011 10:35 pm
- Forum: Cruiser / Prado
- Topic: 1hz fuel pump leak
- Replies: 2
- Views: 219
Re: 1hz fuel pump leak
sweet cheers mate pretty sure its just from the max fuel screw seems to be only leaking from around there.
- Mon Apr 04, 2011 9:33 pm
- Forum: Cruiser / Prado
- Topic: 1hz fuel pump leak
- Replies: 2
- Views: 219
1hz fuel pump leak
G'day lads got a problem with the fuel pump on my 1998 1hz 75 ute just turboed and intercooled. after doing this i have had a constant fuel leak from around the max fuel delivery screw after having the fuel wound up. bit cash strapped and cant afford a full pump overhall so looking for a temp fix ...
- Sat Nov 27, 2010 12:17 pm
- Forum: Cruiser / Prado
- Topic: 75 clutch issues
- Replies: 2
- Views: 166
Re: 75 clutch issues
cheers mate ill give it a go
- Thu Nov 25, 2010 9:18 pm
- Forum: Cruiser / Prado
- Topic: 75 clutch issues
- Replies: 2
- Views: 166
75 clutch issues
im having a problem with the clutch pedal on my 75 ute after driving for a while the clutch pedal becomes nearly non existent and only grabs the clutch when the pedal is mashed to the floor. as in its not spongey it just swings in the wind if i were to flick it. it seems to happen more so on hotter ...
- Sun Nov 14, 2010 9:05 am
- Forum: Cruiser / Prado
- Topic: Thoughts on ex mine vehicles
- Replies: 19
- Views: 1566
Re: Thoughts on ex mine vehicles
my 75 series is an ex santos ute and was clean as. full service history no rust never had a problem with anything. guess it just depends on who was driving it and where it was being driven.
- Thu Oct 14, 2010 7:55 pm
- Forum: Cruiser / Prado
- Topic: 75 series transfer leaking badly
- Replies: 7
- Views: 661
Re: 75 series transfer leaking badly
zoltan which one is the idler shaft?
ed i reckon this might be the same problem as mine but mine seems to leak continually once the box has got to running temps and continues to drip badly once stationary.
cheers dickie
ed i reckon this might be the same problem as mine but mine seems to leak continually once the box has got to running temps and continues to drip badly once stationary.
cheers dickie
- Wed Oct 13, 2010 8:55 pm
- Forum: Cruiser / Prado
- Topic: 75 series transfer leaking badly
- Replies: 7
- Views: 661
Re: 75 series transfer leaking badly
thanks guys has already had the balance tube put in and i replaced the breather also and still no change...
- Tue Oct 12, 2010 9:27 pm
- Forum: Cruiser / Prado
- Topic: 75 series transfer leaking badly
- Replies: 7
- Views: 661
75 series transfer leaking badly
g'day got a 1998 75 ute and the transfer is leaking badly from what i think is the rear output shaft ( where the tailshaft bolts up to the back of the transfer) i have replaced the yoke bit and the rubber seal that sits just behind it and it is still leaking. im losing about 1litre every 2500kms any ...
- Tue Oct 12, 2010 9:23 pm
- Forum: Cruiser / Prado
- Topic: 75 series transfer leaking badly
- Replies: 0
- Views: 122
75 series transfer leaking badly
g'day got a 1998 75 ute and the transfer is leaking badly from what i think is the rear output shaft ( where the tailshaft bolts up to the back of the transfer) i have replaced the yoke bit and the rubber seal that sits just behind it and it is still leaking. im losing about 1litre every 2500kms any ...
- Wed Oct 06, 2010 8:38 pm
- Forum: Cruiser / Prado
- Topic: 1hz 75series front mount intercooler
- Replies: 4
- Views: 354
Re: 1hz 75series front mount intercooler
cheers i was thinking my biggest problem was going to be finding a good spot to come through the front and then back in.
- Mon Oct 04, 2010 4:55 pm
- Forum: Cruiser / Prado
- Topic: 1hz 75series front mount intercooler
- Replies: 4
- Views: 354
1hz 75series front mount intercooler
has anyone done a front mount cooler on a 1hz 75?
is there an off the shelf kit?
was looking into top mount coolers but it seems the inlet manifold restricts the size of the cooler you can run.
any pics or links of a 75 with a front mount would be much appreciated. cheers
is there an off the shelf kit?
was looking into top mount coolers but it seems the inlet manifold restricts the size of the cooler you can run.
any pics or links of a 75 with a front mount would be much appreciated. cheers
- Mon Sep 13, 2010 7:51 pm
- Forum: Cruiser / Prado
- Topic: 1hz/1hdt fuel pump
- Replies: 3
- Views: 353
1hz/1hdt fuel pump
g'day got a 75series 1hz with dts turbo kit.
wondering if the 1hdt pump with boost compensator would bolt straight up as my pump is leaky. and if anyone knows a good mob to get my hands on one?
wondering if the 1hdt pump with boost compensator would bolt straight up as my pump is leaky. and if anyone knows a good mob to get my hands on one?
- Sat Jul 11, 2009 11:19 am
- Forum: Cruiser / Prado
- Topic: hdj79 4inch lift??? is there an off the shelve kit???
- Replies: 1
- Views: 172
hdj79 4inch lift??? is there an off the shelve kit???
just purchased an 03 79 ute and was finding it hard to find a 4 inch lift on the net... any help would be much appreciated... cheers
- Wed Sep 24, 2008 8:56 pm
- Forum: Cruiser / Prado
- Topic: driveline dramas on 75
- Replies: 4
- Views: 404
- Mon Sep 08, 2008 9:22 pm
- Forum: Cruiser / Prado
- Topic: 1992 to 1998 Cruiser utes
- Replies: 4
- Views: 371
i currently own a 1998 cruiser ute which has had no major problems from 190,000km through to 255,000km now while i have owned it. mates of mine with older models have had dramas with 5th gear letting go and power steering pump seals leaking. apparently they have a problem with the gear oil drining ...
- Mon Sep 08, 2008 8:18 pm
- Forum: Cruiser / Prado
- Topic: driveline dramas on 75
- Replies: 4
- Views: 404
driveline dramas on 75
my 75 series ute has developed a strange quite loud tinging sound (metal on metal)when accelerating. the sound dissapears as soon as i decelerate, punch the clutch or when the wheels are no longer under much load. i have checked exhaust for tension, all parts of the tray are solid and there seems to ...
- Sun Sep 07, 2008 9:20 pm
- Forum: Cruiser / Prado
- Topic: 75 series Turbo or exhaust???
- Replies: 8
- Views: 544
75 series Turbo or exhaust???
i currently own a 1998 75 series ute with a page full of mods but sadly a stock motor still, as i am planning a year long trip around the country in january i have been looking into improving my power/fuel economy. go the turbo or go the sticks and a 2 1/2 system??? is the turbo worth the money? the ...