Outer Limits 4x4 Board

cheers all

cheers

hi all am in the process of spending a shedload of cash on my 94 rx td42 and want to fit a safari tuff clutch and get the box serviced can anyone recommend a good workshop on brisbane northside?
cheers in advance
ps and ones to avoid!

yes they are new filters and i ran a film of clean oil round the seals first,i may take them off at the weekend and replace them, i was beginning to think that the oil dipstick tube that runs between the filters might be pushing them apart slightly, the first filter went on easy but the second was a ...

i've noticed a small oil leak coming from the bottom of the filters(both) they are ryco filters tightened by hand as far as i can then nipped with strap wrench, are the rubber seals the filters sit on prone to leaking or wearing? its a very small leak but i want it sorted . i wiped the oil off and ...

GDAY ANYONE KNOW IF YOU HAVE TO HAVE A MOD PLATE FOR A BARRIER? I BOUGHT A MAGNA ONE FOR $10 AND AM GOING TO CUT THE TOP DOWN TO FIT A GQ WITH DRAWS
CHEERS

TOJO2NISSAN wrote:my next door neighbour has 33x 13.5 baja claws on 15x8 sunnies on a comp sierra and runs about 4-6psi and has had no dramas, i know its only a light car but so long as ur pressures are suited to the wait of ur car then u shouldnt have any dramas

cool cheers mate

has any body had any problems with 13.5 wide tyres on 15x8 sunnies? thay will be aired down for beach etc
cheers

giantracing wrote:bring it to me and we have a look,

the diesel shop
3/34 tradelink rd browns plains
38008236

i'll book it in asap
thanks

Also on the td42 there is a line from a pressure relief on the back of the rocker cover that feeds into the bottom of your intake box, take the line off the pressure relief and run it, see if it helps. If they get a bit blocked they build up pressure in the system and will stop your valves opening ...

i checked that the peddle hits the stopper which it does with car running or not ,i've also checked the cable for slack but thats fine,theres definately no filter in the pump,and it does blow black smoke at 3k , i'm taking it out at the weekend and giving it some stick maybe its just sooted up? its ...

going to try at the weekend with a piece of mig wire

we had a good look for the gauze filter but couldnt see/feel one and changed the fuel filter for a new one(was a lot of crap in the old one)and we bled the system, i'm not one to thrash my cars but i knew the old owner and he would have given it some stick but cant confirm this,i'll have another ...

gday 94 rx wont rev past 3k rpm have just changed the fuel filter and air filter then removed the 17mm banjo bolt on the pump to clean out the gauze filter but there was no spring or filter under that bolt,just a hole with fuel in it,its the black top non turbo motor 270k , any ideas? ps no the ...

gday i have a 94 rx 4.2d and it wont rev past 3000rpm i put a new fuel filter in removed the 17mm bolt to clean the small gauze filter and there was no spring or filter. its a non turbo black top motor with no issues( oil burning high temp etc) i'm going to try a new throttle cable next, any ideas ...

ps i take it you've fitted adjustable panhards to?

mate my lwb gq is lifted 4" and it vibrated like hell,i've just put 16mm longer bottom control arms in(300 from hobzees in vic,much stronger than originals to) and its much better but its still there, next move is adjustable upper control arms (will be fitting them 5mm shorter than standard so as to ...

hey mate i'm ordering some fully sick rockcrawler 51 series black 15x10 rims i'm in bris they are coming up from melb 130 per rim fitted, i rang procomp in melb and he gave me the stockists number, they are stronger than cheap crap sunraysias( and look the business to) hope this helps

gday
my gq (94 lwb) has rooted drivers seat,want to swap for similar nissan, was thinking skyline, should be easy to swap rails over? anyone else done this? theres probably a thousand threads to this but dont have time to look! cheers

$130 for the vdo guage and sender for patrol delivered from perth to brisbane, from aisat guages (vdo)

cheers guys

gday my rx has a slight vibration from take off i've been told its the pinion angle where the car has been slightly lifted(4") and that adjustable lower control arms will fix this, (if you look at the tailshaft you can see where the tube that goes in to the rubber seal is being pulled out further ...

thanks fellas i'll go for the vdo guage..

gday ive got a 94 4.2d rx does anybody know if oil pressure fluctuation is normal on these motors? somedays it sits just below the 4 on the gauge other days below the 1st marker on the guage,it runs fine doesnt use oil or blow smoke,275k s on the clock,was thinking it might be the oil pressure ...

And if you fit one out of a SSS Pulsar it will give your car 5hp extra. I paid $70 for mine from the local wreckers. The bloke said they dont keep them long as most dealers want Pulsar steering wheels for Navara's. Wish search worked for me. Heres some links I found- http://www.outerlimits4x4.com ...

turps wrote:Yes
Navara/Patrol/Pulsar all have the same spline. My GQ has a Pulsar steering wheel.

cool thanks mate

gday does a navara d22 steering wheel fit my rx patrol(94 model with adjustable steering column? cant find a good wheel for gq but plenty of navara ones need thios for rwc,
thanks

Hey I am in Newcastle and just been told buy Autocare that I can't get MTR's in the sale and I tried a couple of tyres centers hi mate i used to live in raymond terrace i went to o'neills in melbourne street maitland was told buy three mtrs get the 4th free(33x12.5x15) give them a call,(this was ...

I am looking at TD5 Discoveries but I keep getting tempted by P38 rangies. The 4.6 litre V8 has the "I want one" factor. Are they as unreliable and thirsty as they are made out to be? elo mate you could ring peter haylock at kotara nsw 4x4 land rover wreckers and ask for his advice a very helpful ...