Outer Limits 4x4 Board

i mate i get 12 litres to the 100 no matter what, around town, highway or kicking its ass on the tracks and 10.5-11 with the gas running too. that with a 5 inch lift and 33's

hey guys i've got a 94 gq patrol td42 and the brake lights rnt working, at first thought it was the globe holders so i changed all those over but still no luck. any ideas???? rear numberplate light still works and my indercaters still work too. any help would be great as i'm about to burn the damn ...

r they just a generic type or model specific i jeep getting handed narva ones with no rubber seal and 4 little teeth things not 3, start to sh@t me how hard it is to find these things

cheers for the help

hey guys just wondering if anyone can point me in the right direction as to getting new brake light globe holders with the little wiring harness for a 94 gq td42? or do i need to get a whole new light assembly, the ones in the rear bar. and has anyone found a brake light to replace the one in the ...

because i dnt like the look of a full stainless steel snorkel TBH and i know it will flow better but i highly doubt it'll affect preformance or economy or anything of the sort and doubt ull notice it.

hey mate how u doing, i'm a sheetmetal fabricator looking to do a snorkel too but been abit caught up on where the get those rubber bends from sounds like u found them for a good price, i got access to every type of stainless steel tube/pipe that u can think off, 304 will only rust if it's exposed ...

yer definately agree mate on the more air the better but i was thinking that 3inch inlet to the manifold would still be supplying more then enough air and that y the engine can take it as it needs it???

could be way of par... let me know if i am?

thanks for the help guys i'll give a those places a ring and get some prices, i'll put a thread of the snorkel build in the next few weeks when i get around to it if anyone is interested. just another quick question what r people using for going from the round of the snorkel to the square of the ...

thanks mate, but somewhere in vic would help me out alot more

hey guys am planning on making a 4inch stainless steel snorkel for my 94 td42 gq, just wondering where u can get the black rubber bends/joiners at a reasonable price.

went to reece plumbing and the wanted $90 for 1 90 degree bend and couldnt offer 45 degree bends.

cheers for any help guys.

lol im in vic but thanks anyway mate

thanks for the replys guys, i the motor isnt running rough at all, and i wouldnt say its lacking power because it gets moving quite easy but at the same time the second i turn the gas on it does give it a little boost in power, just makes it feel more like driving a petrol engine in my opinion. i've ...

hey guys, just wondering if anyone could lend some advice or possible reason as to why when i turn the gas on in my td42 it starts to ping when revving over 2000rpm's or alittle lower when under load. i can turn the gas on and off in the car at anytime via a switch. and sorry cant tell u guys what ...

thanks fort all that advice guys, ill straiten my steering box on the weekend and do the screw up as well. just got the passenger swivel hub all done, then ill see how it all goes. thanks guys. Just be careful, if you tighten the screw too much it can make the steering very heavy when you are near ...

Had the same problem with mine been more of a suggestion wheel then steering wheel like said above. just had a play with that adjusment screw and lock nut definately sorted it out, car actually goes where u point it and not just somewhere there abouts. think i might have done it up to tight, as u ...