Outer Limits 4x4 Board

Hi all, I am looking at buying a welder for general fab work at home. I have done a bit of arch and mig welding as well as some oxy in the past. My question is are there any things that tig cant do that mig will. Also an i correct in thinking that you can weld ali weth a tig that can do ac. Cheers

The ones you are looking at have the fog optics. So lots of spread and not much distance. The advantage they have over the roolite ones is they have a metal housing and will not break unless given a really hard smack from a tree ect

You do get what you pay for. How long will it lady add the best way to get cheap led s to be bright is drive then hard but then they due very quickly. Also think about his week a 100 dollar one will be sealed

I tried looking for ages fir one but the only one I could find was about $250 plus shipping. I ended up going a top Mount. Ps I still have the safari cross over if you want to buy it to hack it up

Hi all. It time to get the mrs a truck and I was thinking of getting a diesel RA rodeo. Am I right in thbiking that they don't have the same motor as the jackaroo, if they do do they have the same injector sleeve problems? Also I hav a 73 series middy cruiser as my fun truck and it currently has 31 ...

Cheers for all the help guys. I only need 5 seat so there is no dramas there. The disco II looks pretty good andd aren't that expensive, until they go wrong. But that is the same as any diesel.

I was looking at diesel more for economy and reliability. I am after a mid sized as well hence the suggestions I made.

Hi all, I am looking for a new rig for the mrs. We are looking to spend about 12-15k and looking for somthing fairly new, around 2000 modle and I would prefer a diesel. I have been having a look around and I was thinking of a holden jackaroo or rodeo maby a prado or tridon. Does anyone have any ...

Thanks guys for all the help. I will need to have a good look at finances to see what I can afford

Thanks for your help 91mav. k083 is whats printed on the build plate. So yeah its a 9.5" centre. I am not sure what the ratio is but I am pretty sure that its 4.11, what the best way to check, on the back of the diff? I am located in melbourne, eastern suburbs, and the truck is in the western ...

Hi all, I have a '85 73 series middy with k083 diffs and a 305 chev. I broke the diff on sat due to a spirited take off. I havent got the truck home yet so I havent gotten a chance to have a look but what usually breaks in these? I am just trying to figure out how much I am up for. I have also had a ...

Also have a look at your uni's mate

I have a 73 series middy with a 305 chev small block. here is a pic of the engine http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/188264_10150106292810878_536325877_6561668_2754828_n.jpg and it in the car http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/189259_10150106293375878_536325877_6561675 ...

I have almost finished my chev v8 in to my 73 middy. It has a Dellow adaptor and I have not had any fouling problems with the fire wall. Having said that it does have a 2" body lift. If you cant massage the firewall enough I would sugest a bady lift

I am going to agree with you on the misinformation thing. The blokes upstairs do tend to spin a bit when it hits the fan. I would be interested in who gave you your info, PM me if you want. At the end of the day there are a lot of good and bad filters out there. All you need to ask your self is who ...

What did the management tell you and who was it? You cna just use initials if you dont want to post names. Unfortunatly it was a case of two problems that had the same leaking point. Could have happened to any filter company really.

I will give you my back ground so that what I am saying has a bit of weight. I have a advanced diploma in engineering and am a former empoloee of Ryco. You are right in saying that it is not conclusive just to eye ball the inside of a filter. Things that you cant tell are the micron rating of the ...

I have used both types and the multi size types are really average. go the single size ones ever time

Personally I would go a 3" all the way. 2.5" wont flow enough. That is generally speaking with turbos. I would get a new exhuast bloke for 2 reasons. 1. As mentioned before you dont want any back pressure with a turbo set up and .2. he charges way to much

A resonator will not change volume. They are used to eliminate "booming". unless you are happy with a crazy loud truck I woud suggest using atleast one muffler

As far as IR cameras are concerned, you can get the ones that are colour and then in low light turn to IR so it wont suffer wash out problems during the day

lol oops may bad

you will have no dramas with fitting a boost gauge mate. if you get one for a turbo that has negative pressure only the posative pressure side of the gauge will be used as cars with blowers do not have negative pressure, you can get blower gauges that only have posative pressure, your choice really ...

+1, but if your are really stuck you can use it

hey mate any engineering shop shoud be able to do what you are after. A tube bender is about $180 or so. You will need a welder as well

If you are in doubt go to http://www.rycofilters.com.au" onclick="window.open(this.href);return false; and use their online catalogue. There is dimentions and pics there

Hi all,
I have a 73 series cruiser that has a 350 chev kit in it and I just baught a 350 chev to put in it. Do I have to get a custom clutch (ie chev pressure plate and a cruiser friction plate). Any help would be good.
cheers
Jonno

did you change your air box when you changed your turbo. If so that might be your problem. otherwise like a few other ppl have said, look at you manifold inlet side.