Outer Limits 4x4 Board

That's what I was after. I got a plug and wiring harness today from pick and payless. Was $5 for the harness and bottom bolt. I removed the alternator mount today and drilled out the holes to accomodate the larger bolt. Tomorrow I have to grind a bit off the mount, about 2mm to fit the larger ...

It's been covered here before but I can't seem to find any information that doesn't lead to a dead link. I've picked up an alternator for an EF Falcon, the 110amp unit. I need to visit the wreckers to pick up the regulator plug to suit and also the charging wire and mounting bolts. Is there anything ...

I have a 1990 SWB Vitara with the G16A engine. The started motor has been drowned in mud one too many times and is dead. So I'm trying to remove it which is supposed to be simple but I just can't access the mounting bolts easily, from above or below. Has anyone done this before? If so how did you ...

Have got the 30 and 15mm spacers in. Now I'm hunting down some 235/75/15 MTs to go on the stock wheels.
At this stage the Hercules Trail Digger's look like the ones. I'm happy with a cheap set as the car is only driven for 4WD trips with no commuting.
Do you know of any cheaper muddies?

do know if they will be legal but the fit no problems. if you get pulled up for them chances are thats going to be the least of your problems I see. I have the same model as the OP, 1990 Vit SWB Soft top. I've bought coil spaces, 30mm rear and 15mm front. The car needs a pink slip and I was going ...

Will the 235/75/15 fit on the stock wheels legally?