Outer Limits 4x4 Board

Nah, not adjustable.

With the factory set-up and all the extra weight I have, I was riding on the bumpstops. The rear has actually lifted 4" with the new coils and the Ralphs.

The ride is not harsh at all.

Just wondering if anyone has a Tough Dog 2" lift with Ralph shockies on their 105 series.

Mine goes in on Sunday and was just after some feedback.

Cheers

There is a strongarm carrier for a 105 series on eBay at the moment for $1500

A mate of mine has a 100 series with an ARB Roof Rack that is heaps bigger than the one sold by ARB for the 100 series.

My question is: Has anyone out there modified another model ARB rack to suit the 100 series mounting kit? If so, what model ie: 80 Series, GQ/GQ rack etc.

Cheers

Hey gurus. New to this Toyota stuff & wanting to replace my splitties.

I have the opportunity to pick up a set of GXL wheels and stamped on the inside is: J16x18JJ DOT TOPY 727 00 4.2

Will these fit my solid-axle 100 series standard? Ie: Not IFS?

I have been searching for a set of steel sidesteps for my 100 series standard, and to my amazement, neither ARB nor TJM make them anymore without the side rails. Since I have a Toyota winch bar, these may, or may not match up to my bar.

Anyone know of anyone who makes good, solid, STEEL steps???

Airflow for GQ TB42 $275 from D4 Offroad. Sydney 4x4 show special. They had run out at the show so shipped it for free. (03) 95438155

Had 4x4 shop fit it and they said that plumbing does not line up behind the guard. Looks the goods on the outside, just need to rig up a tube inside.

Has anyone out there made their own roof console for a GQ LWB? How did you get the curve of the roofline right? I have made up the box from MDF and will cover it with carpet from a car audio shop ( the type they put on subwoofer boxes) Then relocate the interior light to the console and put in my ...

Nice sliders dude, even better pinstripes!!!

No offence, but you might as well ask these guys how to lower a Hyundai Excel (fully sick!!!) Most body lifts/suspension lifts on these pages will actually be used.

Like bogged said, why more height when you don't go off road? I can only see you getting grief from the police/RTA.

It all depends on what you are going to use your vehicle for. If you are going to be doing some long distance outback touring, cape york etc, then a diesel makes better sense, as the economy is better and you can carry more fuel. Especially when fuel is $1.50/L in some places. If you are only going ...

Lookin sweeeet.

What model LightForces are they, and do they fit on the ARB bar without adjusting the mounts & stuff??? I've got a GQ with same bar & want LightForces.

Anyone know where I can get a new motor for a Warn XD9000 without paying $650 for a new one from ARB???

Anyone know of anyone who can rebuild a Warn XD9000 in Canberra? Preferably who don't charge $80 an hour labour? I scored it for $0 I stripped it, cleaned it, but want to make sure it's put together properly.

Anyone know how high a GQ can be lifted (legally) in ACT? I have seen a few 6" kits for sale but don't want to spend the cash if I'm going to get hassled by the fuzz. What about tyre size? I want to go at least 4" up with 37"mtrs. Do I need to get an engineers certificate? Help me out Canberra guys.

I've just got a 93 Mav XL. I bought the Gregory's service manual and everything is identical mechanically to the Patrol. The diffs vary according to trim level, however they are still Nissan gear. Could be standard, LSD, or locking on the XLT. (Why they put factory lockers on the models least likely ...

I just scored a WARN XD 9000 winch on the weekend for $0. When I started to pull it apart, the gears were full of this thick, white, almost like wet ash kind of crap. I assume it is just really old lube that has gone bad. Does anyone know what it is & should I be worried about it? I'm going to strip ...

Thanks Bazz.... How many beer vouchers would that set me back. Only had it for 'bout a month. Haven't looked that far into it yet. As with everything; have HUGE plans but limited funds.

How much should I pay for a decent exhaust / extractors set up for my 94 Mav dual fuel??? Is there enough extra power to make it worth it?

Depending on how much cash you have.... Have you thunk about a GU "dual cab" ute. ie, one thats been in a rear ender and had the gas-axe treatment behind the back doors? They can look pretty tough, will fit the kids and the hairy kid too.

Some smart engineers will still be able to do solid axle swaps on them. Have a look at all the solid axle Surfs, Navara/Pathfinders, Vitaras that are getting around nowadays.