Outer Limits 4x4 Board

Try and find "Yield" - made by chemsearch

Best spray I've ever used


http://www.outerlimits4x4.com/viewtopic ... 0&t=219435

I put a 60 series 5 speed in my 47 troopy and took the back half off the 47 transfer and swapped it for the back half of the 60 transfer. It fits perfectly and the stock handbrake cable will still reach. Way easier then doing the rear wheels handbrake set up. What did you do with your chassis ...

I would have thought you could fit one, as they have the same transfer case with the exception of a slightly larger idler shaft in the later ones. I guess you would also need to use the earlier case so you had threads in the casting to mount the brake on. I'll have a closer look next time I'm at the ...

Does anybody know if adapting a H55 gearbox to 1VD engine is possible? 1VD bellhousing looks totally different from the outside, and doesn’t appear to be an easy task. Is the bolt pattern of a 1VD the similar to the 1Hx series, enabling the use of a 1Hx bellhousing? Starter motor positions could be a ...

Check your engine mounts, my 40 did it until I changed the mounts.

The twist in the driveline was pushing the shift lever against the hole in the floor - popping it out of low when I lifted the throttle.

M10 x 1.25