Outer Limits 4x4 Board

I think you might find the problem is that its a carberated engine and not injected. I tried high octane fuel in my old suzuki sierra once and it wouldn't even idle let alone perform better. Put 95 unleaded back in it and it ran fine. I think there is also info on the pamphlet from the servo about ...

Or you dont thread at all and take the seats out and all the carpet and then cut sections of the floor out where the head of the studs are and then drill out the old studs by drilling the head off. New long 10mm 8.8 bolts to replace the old. Tack the head with a thick washer to the body to make a ...

Now that you mention it i would sell it registered but gettin a safety certificate would be hard with all the mods and the dents in the body. Im also worried about insurance matters for the buyer and if they have a crash and throw the blame back on me for modifing the car. Mite have to bite the ...

Hey there. Jusy wondering what kind of offers i would get for my zook come time to move on to bigger and better (read nissan/toyota). It is an 85 model NT hardtop 1.3l 5speed done just over 215,000ks bought stocko for $2,800 about 3 years ago Whats been done do it: 2inch spring and brand new shocks ...

mate i have some 2inch lift springs for sale for $400. They've done less than 3,000ks cause my car is always at home on the racks gettin modded. I don't have any shocks for them but the easiest way to get some would be to measure the length (taking in compression decompression travel) you need and ...

I smashes my oringial windscreen building my roll bar (long story) got a new one put in and rolled my car. It didn't break it just popped out but when i went to put it back in after fixing all the panel work i realised my windscreen hole was squased in one corner and i smashed the glass trying to ...

its is quite normal to hear a very slight whirring noise when you take your foot of the clutch in neutral as your gearbox internals start to spin, they just have no load on them. You will find any car makes a different sound in the box when liftng or depressing the clutch.

Now wait before you shoot me down in flames for asking very FAQ's, i have been doing a far bit of searching mostly in the bible, but i still haven't been able to piece together the answers im after. My questions are .....(big breath in) 1. People use Lux diffs under the zooks all the time but can ...

i am also interested in tryin to fit an auto to my 1.3 sierra as i need a new box and im sick of smelling burning clutch.

so does the 1.3 jimny box fit in or have i read ur convo wrong.

would love to know where i can find some info on what fits and how to do it.

cheers

far enough. How strong is a minispool say in comparsion with an autolocker? Do the make any noises like an auto locker? and last do you know of anyone who has fitted one and are they happy with the setup?

thanks for your help fellas, now the hard part is sourcing a 1ltr tranny. I am also thiniking of maybe doing a rocklobster conversion later but maybe i'll just save up for s3's.

I've read a little about vitara 5.12 diffs fitting into a sierra and was wondering do that fit in a nt 1.3 and how hard is it to do. I need a lower ratio because of my 31s so i was thinkin of swapping to the 5.12s and chucking a 1ltr transfer in as well (yes one with a 4wd light). Has anyone ever ...

I was thinkin of another way to weld it but im not exactly sure how strong it would be and you would have to be bloody accurate when building it. I was thinkin of getting some tick wall pipe, the OD being just smaller than the diameter of the flat face of a side gear . Cutting the pipe to fit ...