Outer Limits 4x4 Board

Find another brand of brake shoes that are manufactured locally and to the original spec out of a locally grown business.

and several thousand k's later thank Dumbdunce for his persistence with logical process and analysis.

Front mount air cooling works best for me. plenty of posts on my rig and the setup is near 7 years old, with plenty of touring and playing k's

At one stage I ran Bio diesel and ended up with problem similiar. Check the fuel filter - bad batch of fuel can make a mess .

I have a front mount cooler on a 2h and I have been running for years now on about 12psi boost. Goes well and works well with a 12ht you can do a lot more boost as the engine was already designed to run turbo.

me too - 4.88 'cruiser gears.

heres mine on a 2h went on at 240k, still happy at 300k :D

http://i36.photobucket.com/albums/e8/Sixdeetoo/turboandcooler/fmicfrontprofile2.jpg
http://i36.photobucket.com/albums/e8/Sixdeetoo/turboandcooler/fmicfrontprofile.jpg
http://i36.photobucket.com/albums/e8/Sixdeetoo/turboandcooler ...

x2

Hey Wambat,

Denco/ schwitzer - model i'll post later

Just for my 2c worth, my turb and cooler setup was installed 4ish years ago and still flies well.

My setup came from a donor vehicle ( was carts old 60 ) and it is a truly reliable setup with boost building from about 1400 ish revs, it'll ...

oh and rego was only 6 weeks ago.

Gee thanks.

:bad-words: :bad-words: :bad-words:

sorry for the hijack - Ive just paid out part A of my certificate but i need to complete:

adjust park brake

Extended brake lines

rear mount for extended brake lines

rear muffler (over sound by 7.1db)

extra rubber hanging below rear mudflaps

blue slip ...

They rock. They are cheaper and easier to maintain than 80s.

But you need to get one without rust in the pillars or roof.

heres mine.

http://www.4wdaction.com.au/shed/index.php?id=154

Bran

2H is an easy pleaser especially when turboed and auto and no rust.

ditto Dennys' call.

They are bloody good trucks without cancer(rust).
Maybe get a compression check if you can for the kays.
This wil help with the truth about its service life.

Bran

Do you have a an equalising pressure line between the gearbox and transfer?

It is made up from brass 10mm bsp fittings and allows a transfer of fluid between box and transfer, the leak from the rear could be normal pressure build up on the new seals...............maybe.


my 2c

I loved my old 2h turbo. It was a weapon.

I had a Denco turbo kit, then i custom fitted a front mount intercooler. Used to run 13psi boost. Never had any dramas.

Sure a 12ht is a good motor, but the 2h isn't given enough credit for being a tough old girl. It would keep neck and neck with a ...

me too for interest - can they work a 60 ?

Bran

x2 radiator upgrade.

but where do i attach the exhaust componentry?

would this work?

http://bumperdumper.com/bumper2.htm

Hey these are even better

http://www.bumperdumper.com/

hey Matey ,
shoot a pm to dumdunce - Yoda of things toyota


Cheers
Bran

Coming up to 8 years I've had mine - it is diesel.

But these trucks are as solid as. Rust in the roof line fiind it,sort it out quick and you'll never have to think of it again.

Heres mine

WOO55Y

My wife said no to a new truck - not enough go or tough enough to play i reckon thats significant ...

3"hd king springs for touring but flexs well,recently bout 8mths ago threw rancho adjustables on. King / Ranchos on 60 is good.

my 2c

Bran

NRMA almost anywhere ;but again not for competition.

my 2c

Here's mine

http://i36.photobucket.com/albums/e8/Si ... ilfeed.jpg

still works; mines intercooled though.

Bran

80 rear diff will bolt straight into a 60. they are a fair bit stronger, much heavier case, bigger side bearings, gears are more or less the same but better supported so less likely to break. all 80's are LSD or locker rear.

As quoted by Dumbdunce- my truck runs an 80s diff

part it out slowly and you may...get $8k

or get a cover note from (insert insurance company) and borrow a boat with someone else reversing it... more.

I have a boat.

BRAN

ok fellas - FMIC SETUP as sen on my rig - used to be carts.

its tops and it works. :D :D

have a look - lookie lookie

http://i36.photobucket.com/albums/e8/Sixdeetoo/turboandcooler/fmicfrontprofile2.jpg
http://i36.photobucket.com/albums/e8/Sixdeetoo/turboandcooler/fmicfrontprofile.jpg
http ...

cracked manifold gasket / manifold

Bill,

Just check that your replacement radiator is an Aussie / Toyota original capacity. A few years back the radiator in my truck was replaced with a cheaper option (Thai import) which functioned but crapped itself after corrugations on the lower seam.

After closer inspection the core was F ...

Hey Troy,

Good thing about this thread is that when on the sand on stocko and my truck workin it - the F@ctory gauge went to a bit above the halfway; but because you had detailed the travels of your truck and I knew:

1) My thermo was good.
2) My radiator and coolant was fine
3) The rest of the ...