Outer Limits 4x4 Board

hello all, not long to round 2 LMP I have some very good tracks for both unlocked and locked. all tracks are technical and testing. Saturday night will have an extra little challenge for all to have a go at. this will not be part of the overall points and not manditory to run, however it will in ...

I would just like to say a BIG THANK YOU TO ALL THE TOWNSVILLE GUYS who have given Glen a hand during the week he was there to help him set things up and a special big THANK YOU TO JAKE who helped us ferry everyone from the Airport and get the extra accomodation for all the Brissy people that we ...

Good job Ant you must have an Apple to be able to do such nice work so quick.I wish I could have been there it pretty hard in some spot. Was thier much trouble with scrutinering with all the new bits that where needed. no apple crap here , good old dodgy windows movie maker i didn't get there till ...

Hi Competitors,

I have a special little track for all of you on saturday night, you will all enjoy this one. Can't tell you any more! that would be to easy.

I am at LMP from midday wednesday so see you all there.

glen

[quote="antt"]should be up to spectate wouldn't mind entering the production class one day, only problem is i have a locker, so i need to swap that for a lsd[/quote] Ant if you have a arb locker disable it and you can run in unlocked if you truck meets all other rules for this class. glen

Marshy you can pre book a spot for the ASCC team for this years event.

Vehicles will be

V8 GRUNT. - TEAM TMAX
V8 DIESEL - TEAM KOWARI
ROLY - TEAM MUDZILLA
STAIB RACING -
BIG RED RACING

Hows that get in early.

glen

this drive sounds like it could be very educational, but we can forgo the training if your keen matt.

glen

So why can't you make this the 21st so I can come to play as well.

glen

Thanks to all who came along to support the endevour foundation, these events help make the differance to many who the foundation support. Ralph Huston is tickled pink at the result and is allready talking about next year. As the track and vehicle organiser over the event I could feel nothing but ...

yes shane 2003 are the go. your in are you.

glen.

easy fix for Production class entry Rules, From here on "production" will be called " UNLOCKED CLASS " how easy was that no more spliting hairs on this rule. The main points for this class is 33" tyre size and no lockers. 4" spring lift leaves plenty of scope for mods in this class. If a competitor ...

how close are your vac lines to ny heat?. I have had in the past the vac lines suck flat due to heat from to exhust. try this.

glen

Outerlimits members had a good result for most events, I took 3rd in the mud pursuit with a time of 1min 17 seconds. those 20 valve zooks are hard to beat on a tight track. winner was ben in a green x offroad racer zook with a twin cam toyota engine, 800kg and 160kilowatt. 2 nd I can't remember ...

sorry guys no diff locks for production class, or shimmed up LSD.

glen

[quote="Drafty"]I wonder if you are able to use a tube or internal beadlock with this product.[/quote] drafty I don't think it would work with tyre loc, probably cause chaffing in the tube and tyre loc assembly. this may cause the tube to fail. ask roger smith he may know for sure. glen

dan I have over 20 years with tyres in paticular 4wd and truck, Equal is a good product you just need to be aware to keep it dry inside the tyre. both Baltec and equal work in much the same way, but they will only correct balance problems up to a certain point. the important thing with 4wd tyres is ...

try Scott at Godyear SPRINGWOOD ph 32095188.

glen

the product equal has been around for many years and was used on truck tyres with different rates of success. the major proplem with this pruduct is that it does not like damp conditions, only the dryest of air should be used or even better nitrogen is the best, what happens when the thing gets only ...

I have to print some more copies of the rules, will have some avaiable next week, I'll get some extras to the shop. for you and mike. if anyone wants a copy on the southside of brissie go to EXTREME 4X4 at browns plains. anyone else send me a pm with your address so I can post it out. and yes thier ...

we have intrest for this event to be in all states, My problem is the time to set up in each state for this to happen. at this point in time I NSW AND W/A are being looked at with Vic on the list. To set up each state I need help from the 4wdrivers in each area. or perhaps a club. maybe I should put ...

need to do some more organisation before I can place a venue, if the A.S.C.C goes ahead as planned for 2004 we will need a venue around the mid nsw north coast as a central area to make it fair for all to travell.

maybe can I set a date toward mid december. I'll post up as soon as I can.

glen

maybe worth making an adaption useing the holden 5 speed onto the series transfer. nothing weak about the transfer box. there would only be some mounting to be moved for the engine. I think this woulb be an easy conversion. the diffs may not handle the snapy power of the v6, they tend to come on ...

now Jake it's not baby shit brown, it's called mountain goat mink. or it will be at Xmas time when we go for a night run.

glen

Rollie who did your signage

glen

Brisbane dates are now posted,

yep the ASCC trucks are all well presented, It's a buzz to walk around the billbong camp on saturday morning at the comp and see the machinary parked up.

glen

give me a call on monday and I'll see if i can help you out.

0422 986 275

glen

VENUE Landcruiser park

ROUND 1 6 - 7 MARCH

ROUND 2 10 - 11 JULY

ROUND 3 4 - 5 SEPTEMBER.

Entry levels

PRODUCTION CLASS

MODIFIED CLASS

Glen

Venue BLACK RIVER.

ROUND 1 20 - 21 MARCH

ROUND 2 26 - 27 JUNE

ROUND 3 2 - 3 OCTOBER

This is a bit early, but many poeple have asked so here it is.

Entry levels

PRODUCTION CLASS

MODIFIED CLASS


Glen

I'm so excited that the rover is getting some new paint just for the hell of it, it will also carry the KOWARI CONVERSIONS logo. Got to try and keep up with ROLLY in presentation of the best paint. I will be back in Townsville on December 20th till the 5th of jan. the rover will be there early in ...

thanks for the welcome and hospitality while I was there, I hope you all enjoyed the sunday run. It was a lot of fun. I will be up again for xmas, probably for 2 or 3 weeks to start setting up tracks for the first round. I have set the dates for all the Qld rounds and will post them up later today ...