Outer Limits 4x4 Board

Just wandering what would be tha max tire size that you can run using any of these after market flares? Will they be ok for 37" tires??

The standard flare size fits a standard wheel arch cut out. I am also going to be making a guard with the flare molded into it to fit 37 inch tires for the GQ ...

Yes anything can be modified.

Cheers Jase.

[quote="MONGREL"]Giant sent me these,


I have a set of these at work on loan I am going to mould soon. They will be about $650 for the full set including the rubber.

Cheers Jase.

Hi chimpboy,

It is a very easy job to do what your asking. There is some right advice and wrong advice on here.
First you need to locate where your scoop will sit and mark.
Then cut your hole so the scoop sits neatly in the cut out.
make sure you grind the fibreglass and gelcoted surfaces of the ...

Hi all,

Sorry for the long delay, I am in search for some good GU front guards with flares so i can paint and mould them. In return I will give you the first set of fibreglass guards that will come out of the moulds. These new guards will have the flare Incorporated into the guard.

if there is ...

vanbox wrote:interested in doing GU panels?

Any idea how much weight could be saved with a glass bonnet and 2 guards?

Looking for areas to cut down weight

cheers

PAUL

We already do GU bonnets they weigh about 9 kg. We will be doing gaurds very soon, they will weigh about 2.5 kg each.

Cheers Jase.

sickgqq wrote:Any discount for outerlimits blokes ???

As a matter of fact yes, i think you boys need a break every now and again. Its not much but I'll give you all 15% off all my products.
I hope this helps you guys out.

Cheers Jase.

Ryan wrote:are the doors full size or are they cut down rock doors?? can u make the rock doors?? ie the cut down ones?

The doors are full size, I can make them any hight you want, I can custom the doors to your needs. The next pair i make I'll take some pics and post them.

Cheers Jase.

Sorry about the pic of my ute my wasn't ment to be there.
As you can see we can graft just about any scoop into a bonnet.
I hope these pics are of some help to you all.

Cheers Jase.

Im also interested in the guards. bonet & doors
# are they lighter ? by how much.
# can they be pigmented the colour you want to paint them,so scratches & chips dont show as bad.
# can the wheel arches be made to fit upto 37" tyres.
# can they be a deeper guard so as to cover wider tyres.
Ive ...

Hi all,
I'm just letting you all know that we are now making fibreglass front doors for the comp trucks. They weigh about 7-8 kg and you can have the option of a Kevlar door skin. For those who have heard of Sandy Bowman he is doing the testing on his tiger colored GQ ute. He also runs our ...

Hi all, after all that i sold it for $200 12 months ago.

Hay Dean just take of the radiator cap problem fixed. (Someone had to say it.)

No we don't it's cheeper to go to Nissan and bye one for $96.
Regards Jason.

Hi Grinch,

What sort of scoop were you after?

Hi all, JT Fibreglass Products PTY LTD now makes fibreglass bonnets for GU Patrols,
the prices start at:
Bonnet skin 3mm thick $200 + gst.
Ribbed, hinge and strut mounts $395 + gst.
full kevlar bonnet $545 + gst.
Please note bonnets require pins to hold the front down.
Any enquiries please feel free ...

Well done my gearbox oil change and used synthetic gear oil and it made the change a lot better but not perfect. As the 80s use 3.9 lts of oil I draind 500ml and added 500ml of auto trans oil and what a diffrance,
I've never had such a smooth change. By the way I seeked advice from 3 machanic shops ...

Fibreglass guards don't hold up as well as the Kevlar one's, as the Kevlar guards can withstand a lot more flex before it breaks. You can smash a Kevlar product with a hammer and you will only break the gelcoat and the resin but the fibres will not tear. You do the same to a fibreglass product with ...

If it only hapens when it is cold 9 times out of 10 it is because of the oil is in need for a change to something a bit thinner. My 80 has this problem now I just have to get motivated to do something about it.

Thanx Biders for pulling us out of ss2, without you it could of been a lot worse. As for mudmav go f@#ck yourself you have no idea what went on. The thing is with people like you, you get all your imformation second hand and act apon it. Grow up.

Hi all,
we will be doing a GU bonnet within the next 2 to 3 months. There will be 2 choices just a skin of around 3mm thick, or fully ribbed and hinge mounts. For any further info or pricing call me on (03)9738-0444.
Regards Jason.
JT Fibreglass Poducts.

Hi Mangie,
what resin is used for for your flares, and do you use any glass in the Kevlar flares ie tissue to stop print through from the Kevlar weave.
Your prices sound very fair.
Regards Jason.

I've got a white 4wd with a new wheel stud what class do I go in, oh and tinted windows.

I had a 3f in my 80 it had done aprox 300,000 km and just starting to blow a little bit of smoke, they are a good motor but lack in power. You will find your self in low range a lot when in the bush, that is why I put a 350 chev in mine.

Regards Jason.

That is a good price for the work that gose in to them.


Regards Jason.

more

some more.

Here are some pics of the work we do.
What do you think.