Outer Limits 4x4 Board

fast. Very fast.

pushing 200 HP and the fit's not that tight. There's some lag at the low end now, probably due to running 3.70s with 35" tires.

there's pleanty of clearance between the frame and the manifolds.
http://i13.photobucket.com/albums/a258/biffschpiance/Project%20ToyAudi/IMG_5462.jpg ...

Mine.

It's a LHD truck tho.

well doccumented problem : look half way down. http://www.semaphora.ca/2lte_page.html

There's virtually no bump steer at all. it's a true 4 link. 39 degrees separation on the upper link angle (optimum 41+) degrees

In Canada, i might have problems with a Vehicle Inspection, but only with the suspension part and bumper height. Steering is Ok here as long as it's not a heim or rod-end style. Those are 1 ton off-the-shelf TREs.

Pirate and search are your friend.

www.pirate4x4.com

beware the harsh replies to noob posts tho.

PM me if you want deets on how i contol armed and airshocked my 40.

C.

I run the hysteer setup like OTT has. very good bump steer. Go Hydro assist, you won't regret it.

like this:
http://i13.photobucket.com/albums/a258/biffschpiance/Sept%2018%20wilson%20lake/IMG_2874.jpg

http://i13.photobucket.com/albums/a258/biffschpiance/IMG_5255.jpg
http://i13.photobucket ...

The only pic I have of the rear of my Surf with factory setup (apart from shocks and springs and panhard rod)

don't think that's a true 3 link (radius arm) style link setup.

3 link has just that: 3 links attaching to the frame at 3 points: the panhard rod, and the front two lower links. Think ...

I'm quite surprised that you haven't heard back from the ott guys lately. I've seen them posting up on other boards. . . Could your e-mail messages look like "nigerian scam" type messages???

try them again. i talked to them for almost an hour a few weeks ago about something that i never even ...

3 link style are great. i've got one on my 4 runner that i custom made using Rubicon express Heep long arm parts.

Flex is great.

http://i13.photobucket.com/albums/a258/biffschpiance/IMG_5161.jpg
http://i13.photobucket.com/albums/a258/biffschpiance/IMG_5162.jpg
http://i13.photobucket.com ...

just rememeber that we're a bunch of hours behind you here in Canada.

Call the guys at OTT in Canada. They're stand up guys.

http://www.ottindustries.com/

I'm using Fox 2.5 X 18" stroke airshox on my FJ 40. Flex is stupidly huge, but there is an extreme amount of fussing required to get them set up properly. Be prepared to use a sway bar (currie anti-rock or similar). Expect to have to make some design changes to accomadate the sweep involved with the ...