Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

speedo needle bouncing

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

speedo needle bouncing

Post by tritontray »

Hey all,

My speedo needle bounces up and down while driving.

More so it lower speeds; i.e. up to 80klms. Then settles above that.

I would like to fix it, but can someone give me any back ground on how the needles work? is it a cable, is it just something i need to tighten. baSically if anyone has any experience with this I would appreciate it.

Thanks
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

Check the cable for tight corners, binds or heat damage from the exh.
Remove the inner cable and clean it. Then lightly grease the lower 2/3s of the inner cable. Excess here will can work its way up into the speedo head which can be terminal
J Top
Posts: 191
Joined: Sat Jan 18, 2003 6:23 pm
Location: melb

Post by pickle »

Pulled out Pajero cluster and Challenger cluster out of my 4bys, the Challenger has the same dash as the Triton and pretty sure they are all eletronic speedo.....as in no cable to cluster. I would be checking on the connection to the gearbox.
Dave
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

Thanks guys.

Will have a look later on tonight if i get a chance.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests