Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

axle size on a GQ, front/rear & MQ, front/rear

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

axle size on a GQ, front/rear & MQ, front/rear

Post by bucketofbolts »

just curious, does a lsd out of a MQ bolt into a GQ front,

just checking axle sizes
bucketofbolts is sold, :(
Top
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

i heard they do but the ARB air locker part numbers dont match up

i chould be wrong

mq rear into gq front
No sig line pics please.
Top
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

Post by bucketofbolts »

yeah ok, so im after a mq lsd, pathinder or narava
bucketofbolts is sold, :(
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

mq

Post by DR Frankenstine »

no they don't fit!! anyone done it can correct me :D
Remember some days your the pigeon and other days your the statue
Top
Posts: 686
Joined: Sat Mar 12, 2005 12:34 pm
Location: maitland, nsw

Post by bucketofbolts »

the mq centre wont fit,
bucketofbolts is sold, :(
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

MQ is a "C200" diff (200mm ring)
GQ is an "H233" (233mm ring)
Bigassed rear GQ/GU "H260" (260mm ring)

Navara LSD rear is an H233 with the smaller number of splines that suit the front of a GQ (IIRC 31 splines)
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

looks like im wrong hence the diffrent part numbers on the air lockers
No sig line pics please.
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

DAMKIA wrote:MQ is a "C200" diff (200mm ring)
GQ is an "H233" (233mm ring)
Bigassed rear GQ/GU "H260" (260mm ring)

Navara LSD rear is an H233 with the smaller number of splines that suit the front of a GQ (IIRC 31 splines)
Mq rear can be c200 - unusual, usually h233, and sometimes h260 in late model utes. But the mq rear h233 accepts a different axle to the gq front h233.

as you say tho the navara h233 has been successfully put into a gq front.
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

gq

Post by DR Frankenstine »

Patroler wrote:
DAMKIA wrote:MQ is a "C200" diff (200mm ring)
GQ is an "H233" (233mm ring)
Bigassed rear GQ/GU "H260" (260mm ring)

Navara LSD rear is an H233 with the smaller number of splines that suit the front of a GQ (IIRC 31 splines)
Mq rear can be c200 - unusual, usually h233, and sometimes h260 in late model utes. But the mq rear h233 accepts a different axle to the gq front h233.

as you say tho the navara h233 has been successfully put into a gq front.
so has an mq so reserch tells me and the axles will fit, 31 spline count (apparently)
Remember some days your the pigeon and other days your the statue
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 133 guests