Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ARB air locker vs. Lockrite lokka

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

ARB or Lockrite


ARB
88
83%
Lockrite
18
17%
 
Total votes: 106

Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

ARB air locker vs. Lockrite lokka

Post by dybes »

i have been reading many posts and threads about the pro's and con's of both these units...

i would like to fit a locker to the front of my 60 series and i want to know what people on here think about these two in the front of a 60 ???

what pro's and con's can people think of and who has actually owned one or the other...

cheers
any help would be greatly appreciated
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Re: ARB air locker vs. Lockrite lokka

Post by sierrajim »

Air locker, as YOU controll it.

Have a lockrite in the front of my hilux. It sucks!!!! Steering isn't far off having a welded front diff when in 4WD.

That said Lockrites are way cheaper.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

iss there any comparison???

air locker all the way
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

As above...air locker is the way to go.

I have front and rear fitted in my 60 series...and have never regretted spending the money!

Though I am looking at putting 80 series diffs under the 60...so when that is done I will have a front and rear complete (locked) diff for sale. Maybe something worth remembering there :D :D
L.S Canvas & P.V.C
www.lscanvas.com.au
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

Im not even going to answer that question :?
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

sorry...
also taking into account the prices of the two...

and has anyone got any pro's or con's they can think of???

its fine to say ARB is better or Lockrite... but why???
cheers
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

You have allready read the pro's and cons. They dont differ from vehicle to vehicle.

The only pro a lockright has over an Airlocker is price. Other than that the ARB is better in every single aspect.
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

can anyone tell me if you can steer or not with an air locker, when it is locked?

this is one thing i am still not sure about... can you steer or is it just physically harder to turn the steering wheel or does the rig just keep going in a straight line...???

dont mean to sound like an idiot but i am an apprentice and the air lockers are Very expensive to me... ( plus i am having the engine, injector pump and injectors all rebuilt, and getting a new clutch so my funds are running low...)

cheers
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

exactly what you said...when the locker is engaged the vehicle is harder to turn because it just keeps pushing it forward instead of around the corner. But at the flick of a switch it is dis-engaged so that is nothing to worry about.
L.S Canvas & P.V.C
www.lscanvas.com.au
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

so with the front locked and the steering wheel turned to hard lock the car still wont turn properly...

this is of particular interest to me as i wanna drive it in mud too...

cheers for the replies guys i am almost sold... lol ( im so cheap hahaha )
Posts: 72
Joined: Thu Jan 04, 2007 6:55 pm
Location: Melbourne, VIC

Post by DGS4WD »

Iv always been told, "don't bother doing it unless your going to do it properly". My advice, just go without for a little longer to save the extra money you need to get the ARB air lockers. Yes I know its hard, im an apprectice too and in mechanics (the losest paying trade out of them all!). You end up spending less money and time in the long run anyway.
T.L. 93 80 4.5 GXL Man
Gigglepin winch, beadlocked 37x12.5-17 sticky treps, flip arm, high steer, 6" dobinsons, 33" boss's, longfields, 4.56 diffs, 25% low range, lockers
Team: Cause For Concern
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

I have never done a lot of mud driving but when I have I have noticed that most of the time when driving in mud the track is in/out is pretty straight and there are ruts...these help in the directional side of things.
L.S Canvas & P.V.C
www.lscanvas.com.au
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

alright schweet

i am just gonna buy one...

cheers for the replies
Posts: 478
Joined: Tue Jul 18, 2006 8:43 pm
Location: outer east Melb.

Post by MUD EMPIRE »

so with the front locked and the steering wheel turned to hard lock the car still wont turn properly...

this is of particular interest to me as i wanna drive it in mud too...

Yeah...it's harder to turn but invaluable when wanting to get where
you wanna be. ie. if you want to skip ruts going uphill/downhill..or
if you need to cross mud filled ruts on the flat.....front locker in,
rear out and your chances are multiplied out of site!
Air Locker all the way............
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

cant wait to get my rig back and get out in some scrub... lol i miss my forbie :cry:

how hard is one to fit???

anyone fitted their own???
cheers
Posts: 68
Joined: Thu May 05, 2005 6:24 pm
Location: Gold Coast

Post by hylux »

I have a welded rear and a lockrite in the front, it works very well......... BUT it is very big pain in the butt to turn while in 4X4, also very frustrating shifting into and out of 4X4 between tough spots. I also am very tight but I think the frustratiun is gonna get the better of me.
84 Hilux 2.4l turbo, 2" Body lift ......
Power Steering ;) ....
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

dybes wrote:cant wait to get my rig back and get out in some scrub... lol i miss my forbie :cry:

how hard is one to fit???

anyone fitted their own???
cheers
very easy to put in.. as long as u have a bit of knowledge on how to set a diff up....
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Go the Arb i've only ever had them but a mate of mine has had both in the front first arb then lockite and now he wishes he had the air locker his pro's and cons are locker it's on or off but you have to keep flicking switches where as a lockrite you just drive it the lockrite can break springs and pins which means it just stays locked, lockrite's are cheap but how many pins do you have to break before the time wasted and money spent replacing them out ways forking out for a air locker, so air locker and longfields (Think 60's are same as lux cv's) and you shouldn't have a drama
plenty of parts on the bench
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

when ARB says $1219...
does that include the air compressor and everything ???
cheers
Posts: 1574
Joined: Tue Mar 21, 2006 7:34 am
Location: Greenbank - Home of the web wheelers

Post by booflux »

dybes wrote:when ARB says $1219...
does that include the air compressor and everything ???
cheers
Nope probably not

I have a auto in the front and have never had a drama however mine is ifs so it needs a locker all the time :lol:
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

dybes wrote:so with the front locked and the steering wheel turned to hard lock the car still wont turn properly...

this is of particular interest to me as i wanna drive it in mud too...

cheers for the replies guys i am almost sold... lol ( im so cheap hahaha )
With the front locked both wheels obviously spini at the same speed. As you should know the inner wheel of the turning arc needs to travel slower than the outer because it has less distance to travel. Therefore the inner wheels usually loses traction because it is 'forced' to spin. We all know that a spining wheel is going to travel in the direction of the greatest force, which when cornering is momentum, so the inner wheel is pushed straight ahead not around the corner. This force greatly reduces the traction of the outer wheel and it soon follows suit.
Of course this applies more so on slippery surfaces such as mud and clay. On hard rocky surfaces it just makes it nye on impossible to turn the steering wheel and you find yourself doing eleventy point turns to get around corners.
But if you want to learn the hard way then go and waiste your hard earned bones on a lockrite. Maybe once you wise up a little you'll bung it in the back and put an air locker in the front...

I'm gathering you're an apprentice mechanic??? Here's a little moto for you to carry to work everyday, "Do it once, do it well...."
Don't give in to an inferior job because of cost. If you can't afford to do it properly then you can't afford to do it. You've got a vig task ahead of you with your engine etc. Hold off on a locker until you have the money. Keep your eye out on here and ebay, trading post etc and pick up a second hand one.
Cheers, Dan.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

Save the money and weld it up!! :lol:

then use the money to buy some 30spline chromo longs :armsup:

then you can drive the ring out of it.
OK so it wont make the cool psssst sound, but at least you wont be changing cv's again!!!!!

AIR LOCKER IS NO GOOD WITH BUSTED CV'S!!!!
Last edited by 1MadEngineer on Wed Feb 07, 2007 4:13 pm, edited 1 time in total.
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Post by jimbo jones »

its the air locker all the time
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

1MadEngineer wrote:Save the money and weld it up!! :lol:

then use the money to buy some 30spline chromo longs :armsup:

then you can drive the ring out of it.
OK so it wont make the cool psssst sound, but at least you wont be changing cv's again!!!!!

AIR LOCKER IS NO GOOD WITH BUSTED CV'S!!!!
What are you talking about,i have absolutely no idea?
Posts: 65
Joined: Sun Aug 20, 2006 8:06 pm
Location: Kariong NSW 2250

Post by dybes »

thank you all for your input i will be getting myself an Air Locker after i have run in my engine... ( if it ever gets finished... lol)

cheers
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

bastard wrote:
1MadEngineer wrote:Save the money and weld it up!! :lol:

then use the money to buy some 30spline chromo longs :armsup:

then you can drive the ring out of it.
OK so it wont make the cool psssst sound, but at least you wont be changing cv's again!!!!!

AIR LOCKER IS NO GOOD WITH BUSTED CV'S!!!!
What are you talking about,i have absolutely no idea?
Weld up the front diff - Cheap lockers, but busts CV's
Chromo longs = near indestructible axles and CV's

All the best dybes
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

hylux wrote:I have a welded rear and a lockrite in the front, it works very well......... BUT it is very big pain in the butt to turn while in 4X4, also very frustrating shifting into and out of 4X4 between tough spots. I also am very tight but I think the frustratiun is gonna get the better of me.
how's tire wear on the rear with a welded diff? do you drive on the road?

btw ive got an auto locker on the front and you've gotta be careful when putting the foot down as the cvs don't like being locked suddenly under full load from engine.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

cruiser60series wrote:
hylux wrote:I have a welded rear and a lockrite in the front, it works very well......... BUT it is very big pain in the butt to turn while in 4X4, also very frustrating shifting into and out of 4X4 between tough spots. I also am very tight but I think the frustratiun is gonna get the better of me.
how's tire wear on the rear with a welded diff? do you drive on the road?

btw ive got an auto locker on the front and you've gotta be careful when putting the foot down as the cvs don't like being locked suddenly under full load from engine.
Longs love a good dose of skinny pedal :cool: Unlike nissan cv's :finger: or stock toyota ones :bad-words:
plenty of parts on the bench
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

joel HJ60 wrote:
bastard wrote:
1MadEngineer wrote:Save the money and weld it up!! :lol:

then use the money to buy some 30spline chromo longs :armsup:

then you can drive the ring out of it.
OK so it wont make the cool psssst sound, but at least you wont be changing cv's again!!!!!

AIR LOCKER IS NO GOOD WITH BUSTED CV'S!!!!
What are you talking about,i have absolutely no idea?
Weld up the front diff - Cheap lockers, but busts CV's
Chromo longs = near indestructible axles and CV's

All the best dybes
How do you turn corners?unlock one hub each time.
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

bastard wrote:
joel HJ60 wrote:
bastard wrote:
1MadEngineer wrote:Save the money and weld it up!! :lol:

then use the money to buy some 30spline chromo longs :armsup:

then you can drive the ring out of it.
OK so it wont make the cool psssst sound, but at least you wont be changing cv's again!!!!!

AIR LOCKER IS NO GOOD WITH BUSTED CV'S!!!!
What are you talking about,i have absolutely no idea?
Weld up the front diff - Cheap lockers, but busts CV's
Chromo longs = near indestructible axles and CV's

All the best dybes
How do you turn corners?unlock one hub each time.
Not sure, I'd assume it would be the same as having an auto locker or similar?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests