Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine installation problems

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3
Joined: Fri Nov 24, 2006 6:07 pm
Location: Cairns

Engine installation problems

Post by sickzuki »

Ok guys i have a problem
I have just installed a new engine in my 1990 suzuki sierra. It is the exact same 1.3L engine as what was originally in it except its been rebuilt. The installation went smoothly however the car will not start and idle it turns over alright but wont fire up. When i put my foot flat on the accellerator and try to start it it shoots flames out of the top of the carby. Apparently the ignition timeing has to be set but i can't figure out how to do it. Can anyone help me if so it would be much appreciated.
Posts: 192
Joined: Mon Jan 01, 2007 8:46 pm
Location: LOGAN

Post by DAV029 »

pull no 1 spark plug out , get the piston top dead center make sure the timing marks line up on the front of motor .pull dizzy cap off. if rotor button is not pointing at no 1 lead pull dizzy out and reinstall
sounds like dizzy is 180 out
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Yep think Davo is on the money here. I had the same problem after changing leads. Wouldnt fire checked everything had a beer, rechecked and another beer etc. Turned out when I built the motor 3years ago I put the dizzy in 180o out but somehow fluked the plug leads wrong aswell so it ran. When I changed the leads I got the leads right which was wrong compared to the dizzy.
Nik
Posts: 3
Joined: Fri Nov 24, 2006 6:07 pm
Location: Cairns

Post by sickzuki »

thanks for that info nik i did exactly what you said and the engine runs beautiful much apprecited
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Geez you get good service here ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests