Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Raising bullbar to suit 2" bodylift.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 310
Joined: Fri Jan 12, 2007 1:22 pm
Location: brisbane

Raising bullbar to suit 2" bodylift.

Post by azwa »

Hi just wondering if anybody could give me advice on whats needed to be done to lift bar to suit bodylift.Any advice would be much appreciated,also was qouted $800 by on track,I did my own bodylift on my old mq but a little wary to go farkn up the mav what do you guys think go for it or pay the experts. :?
"instant combustion"
"ITS A JEEP THING"
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

try a metal fab joint and dont forget to mention cash. it should be a bit cheaper

Cheers
Top
Posts: 75
Joined: Sat Jan 21, 2006 9:52 pm
Location: Brisbane QLD

Post by mk swb »

hey mate,

I got my arb winch bar lifted for 2 inch body lift at superior for $275!!!

Great job would highly recomend taking it to someone who is a competent welder and an idea of how to brace it up.

Cheers Rees
20" chrom rim $3000 stainles exhast $1000 monsta tac $500 thinkn it make a lancer fuly sik priceles
Top
Posts: 140
Joined: Sun Nov 07, 2004 10:23 am
Location: Eastside Vic

Post by Goutman »

Sandy @ Aus 4wd quoted me $150... Unfortunately he's closed the doors
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Goutman wrote:Sandy @ Aus 4wd quoted me $150... Unfortunately he's closed the doors
Again! :roll:
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 390
Joined: Wed Feb 02, 2005 2:26 pm

mine

Post by siklux »

ive got an ARB winch bar and side guards and steps off a GU already lifted to suit 2inch body. just take a grinder to the mav and make mine fit......Approx 2 cutting blades @ 2.25 each......cheap!
Top
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

try smithies outback gear
No sig line pics please.
Top
Posts: 310
Joined: Fri Jan 12, 2007 1:22 pm
Location: brisbane

Post by azwa »

The fitter at works got the gear i just want to know what sort of bracing & what not so i dont lose any strength.so i can still use the recovery hooks on the bar.(to recover the father in laws 80 series :lol: )Anybody know whats needed to be done.
"instant combustion"
"ITS A JEEP THING"
Top
Posts: 33
Joined: Mon Dec 25, 2006 6:56 pm
Location: sydney

Post by go piggen »

anyone got pics of a lifted bull bar (of the bracing)
Top
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Contact:
Contact GUJohnno

Post by GUJohnno »

blkmav wrote:
Goutman wrote:Sandy @ Aus 4wd quoted me $150... Unfortunately he's closed the doors
Again! :roll:
OMG :shock: Morkz will have nothing to post now :D ;)
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Top
Posts: 454
Joined: Sat Oct 09, 2004 8:26 am
Location: Brissy

Post by The Big Green Meany »

If you would like a honest price bring it im to TJM Coopers plains, I think we did the last one for around $100, Ask for Darren.
Top
Posts: 374
Joined: Wed May 24, 2006 6:04 pm
Location: Melbourne,VIC

Post by MQSWBUTE »

whats happen to aus4wd have they shut shop and stop trading
No sig line pics please.
Top
Posts: 325
Joined: Sun May 08, 2005 4:55 pm
Location: melbourne

Post by mudmav »

correct i dropped in their last night to say hi, and from what i can gather sandy still ownes the factory but has officially shut up shop. im assuming he will pay out his lease and thats it, but that last bits all heresay.
andrewholmes
Top
Posts: 2775
Joined: Thu Apr 13, 2006 8:59 pm
Location: Melbourne

Post by GQ Bear »

Mine's been done , no bracing required. I'll take a pic tommorrow maybe. ARB bar 100mm RHS cut through. 10mm plate welded to RHS on each side offset by 2". There's still plenty of overlap with the RHS on each side of the 10mm plate. There's no way it will bend or break or anything. No need for additional bracing.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Top
Posts: 310
Joined: Fri Jan 12, 2007 1:22 pm
Location: brisbane

Post by azwa »

thanks alot mate much appreciated.thanks.
"instant combustion"
"ITS A JEEP THING"
Top
Posts: 4
Joined: Fri Oct 20, 2006 7:24 pm
Location: Brisbane

Post by Tomitch »

It its an ARB. Remove the bar from the mounting bracket. Drill new holes at correct height through the mounting bracket. Replace bar. Perfect job. Around an hours work. DIY = Free.
The bar remains as strong as original
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 159 guests